Lee PrecisionRotoMetals2MidSouth Shooters SupplyInline Fabrication
Load DataTitan ReloadingRepackboxReloading Everything
Wideners
Results 1 to 12 of 12

Thread: Ideal Armory press

  1. #1
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711

    Ideal Armory press

    One of the more unique parts of our reloading tool history began in 1905 when John Barlow of Ideal brought it out. From the beginning and all through its 30 year history the marketing of the press was limited to Armory's, police and gun clubs. Never to the individual who needed something better than the Ideal tong type tools. This resulted on low volume sales and an even lower survival rate. Barlow retired in 2015 and sold Ideal to Marlin Arms Company. Great War production demands caused Marlin to sell Ideal to Phineas Talcott who copyrighted the Ideal name regarding reloading tools. For reason unknown at this time Mr Talcott sold the Ideal line to Lyman in 1925 where it has remained.
    Early tools are marked with the New Haven address, later ones with the Middlefield address.
    The 1905 tool and the Marlin are marked New Haven, the Lyman tools pictured here are all Middlefield.
    In 1935 the Armory tool was discontinued, to be replaced with a simplified tool following the same pattern, the Tru-Line press. Simpler production but the same limited marketing and using the same dies.
    But there are two additional tools that use the Armory frame. The #2 Lubricator and sizer and a full length case resizing press. Both are extremely rare. There are probably less than 5 #2's known, only one resizer has been identified. The same holds for the Marlin press, there are just two known to exist.

    Click image for larger version. 

Name:	IMG_6544.jpg 
Views:	81 
Size:	31.1 KB 
ID:	190687Click image for larger version. 

Name:	IMG_6547.jpg 
Views:	95 
Size:	24.0 KB 
ID:	190688Click image for larger version. 

Name:	IMG_6546.jpg 
Views:	69 
Size:	22.9 KB 
ID:	190689Click image for larger version. 

Name:	IMG_6548.jpg 
Views:	76 
Size:	23.7 KB 
ID:	190691Click image for larger version. 

Name:	IMG_6547.jpg 
Views:	95 
Size:	24.0 KB 
ID:	190688
    Attached Thumbnails Attached Thumbnails 12.jpg  

  2. #2
    Boolit Master brassrat's Avatar
    Join Date
    Feb 2012
    Location
    conn.
    Posts
    983
    Great info thanks for posting

  3. #3
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    14,457
    Good solid looking press. don't see a lot of spring in that desighn

  4. #4
    Boolit Master



    Join Date
    Apr 2007
    Location
    Alturas, California...where the west still lives!
    Posts
    2,255
    Pacific gets the credit for our modern "C" press design.......but I always wondered why they didn't copy Ideals down swing handle? I really like my Pacific, early thirties production, but hate having to pull the handle up.

  5. #5
    Boolit Master



    TNsailorman's Avatar
    Join Date
    Dec 2006
    Location
    Northeast Tennessee Hills
    Posts
    2,568
    Well, you stumped me. I have been reloading since late 50's and had not heard of or seen those presses until your pictures & info showed up. Thanks for both the pictures and info. There's just something about the old equipment that grabs me and rarity has little to do with it. The old time stuff was made strong to last long. I care little for this plastic world. james

  6. #6
    Boolit Master



    Springfield's Avatar
    Join Date
    May 2005
    Location
    San Jose, California
    Posts
    3,684
    John Barlow retired in 2015? Dang, he sure lived a long time.

  7. #7
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    Not sure were the 2015 came from. Barlow retired in 1911, he died in 1912 while visiting his daughter in Italy.
    Ken

  8. #8
    Boolit Mold
    Join Date
    Oct 2016
    Posts
    7
    Click image for larger version. 

Name:	100_8258.jpg 
Views:	110 
Size:	51.3 KB 
ID:	191398 I still have a few of these lying around along with some tooling that came from the Winchester tool room that I have to figure out.

  9. #9
    Boolit Master
    Join Date
    Jan 2016
    Posts
    995
    3006guns - GONRA always thought Pacific is the orignal "7/8-14 threaded dies" source.
    Is this correct?

  10. #10
    Boolit Bub
    Join Date
    Sep 2016
    Posts
    40
    Quite an education. Thanks !!

  11. #11
    Boolit Grand Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    13,617
    So these used the 310 dies, Ken?
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  12. #12
    Banned
    Join Date
    May 2008
    Location
    In the Gopher State of Minnesota
    Posts
    6,711
    Wayne, no. they use a complicated odd ball die. Look closely at Minaprob's picture. He has a number of die parts.
    I published an article on these presses a few years back with directions to reload using their dies.

    I had an email disaster and lost your email, and everyone else's too. If you send me a note I can send the article to you.

    Ken

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check