Graf & SonsRotoMetals2Lee PrecisionStainLess Steel Media
Inline FabricationADvertise hereMidSouth Shooters SupplyTitan Reloading

Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: Any insight on foaming bore cleaners?

  1. #21
    Boolit Man
    Join Date
    Mar 2009
    Location
    SE Ks
    Posts
    108
    Wipe out is my goto for heavy copper fouling. I've use Barnes, Sweats, Montana Extreme and the Bore Tech Eliminator,but none matches the foam for me. One thing to remember, the foams don't do much for powder fouling, especially burned on cake so you need a different solvent for that.
    I simply put a good rod guide in the action/chamber and squirt the stuff into the bore through a soda straw till it comes out the muzzle. The stuff tends to puddle in the bottom of the bore after the foam starts breaking down, so I lay the rifle down horizontally for 6 hours to overnight. Then I patch it out, maybe brush a couple strokes to roughen up any carbon cake, run a couple patches with brake cleaner and foam it again. Then lay it on the opposite side for a few hours. Works every time without all that many strokes with a cleaning rod and it's potential to wear the rifling.

  2. #22
    Boolit Master Tripplebeards's Avatar
    Join Date
    Apr 2017
    Location
    The great north
    Posts
    651
    I use the foam. when the foam brakes down to a liquid and you have copper fowling blue liquid will drip out of your barrel. The only issue I've had is if you don't clean out the left over in your action it litteraly glues your action shut and gums every thing up. Spray your action with something like rem oil and wipe it out afterwards.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check