RepackboxLee PrecisionLoad DataMidSouth Shooters Supply
Reloading EverythingInline FabricationRotoMetals2Wideners
Titan Reloading
Page 1 of 3 123 LastLast
Results 1 to 20 of 41

Thread: I am in need of a 358 win seating die

  1. #1
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340

    I am in need of a 358 win seating die

    Would anyone have a 358 winchester seater die RCBS ,Lyman etc but not Lee lying about they no longer need?
    Have a sizer die but need the seater die that does a crimp.

  2. #2
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Thursdays Bump

  3. #3
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,334
    I use an old C-H set. I'm not sure the seater crimps but I'd be shocked if it won't. Let me check and I will loan it to you if you want. My .358 is due for a stock refinish so I can do without the dies for a spell.
    Best, Thomas.

  4. #4
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Quote Originally Posted by Texas by God View Post
    I use an old C-H set. I'm not sure the seater crimps but I'd be shocked if it won't. Let me check and I will loan it to you if you want. My .358 is due for a stock refinish so I can do without the dies for a spell.
    Best, Thomas.
    Thanks for the offer but I would rather use one I own. Never liked to borrow anything if possible. It is very nice of you to make the offer, just the way my Father raised me.

  5. #5
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,334
    I get it. Neither a borrower or lender be.
    Best,Thomas.

  6. #6
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Still hoping someone has one.

  7. #7
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Thursday evening bump

  8. #8
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Keep hoping someone will have a old one lying about. Does not need to look pretty,

  9. #9
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Friday bump to top

  10. #10
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Mondays bump

  11. #11
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    one week later and still in need

  12. #12
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Maybe one of these days ?

  13. #13
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Guess it is time to throw in the towel

  14. #14
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,479
    Don't throw in the towel yet

  15. #15
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Quote Originally Posted by BK7saum View Post
    Don't throw in the towel yet
    Alright if you said so.

  16. #16
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,479
    I thought I had something for you, but it turned out not to be the case.

    I have what appears to be a Pacific 358 Win neck sizing die body with no stem. It is marked "358 Win" with a "N" with the top threaded for a stem. Does not appear to be a seating die, because there is no crimp ring in the die body.

    I bought this and a 38 special sizer or expander die here to attempt to make a die or two I needed. If you can use the 358 at all, let me know. I was hoping it was a seater die, but no luck.

  17. #17
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Thanks for the offer of the sizer. I have a sizer die just hoping for a seater with the crimp.
    Hang on to the die for someone else in need. there are a lot of us out there.
    Thanks again for your kindness



    Quote Originally Posted by BK7saum View Post
    I thought I had something for you, but it turned out not to be the case.

    I have what appears to be a Pacific 358 Win neck sizing die body with no stem. It is marked "358 Win" with a "N" with the top threaded for a stem. Does not appear to be a seating die, because there is no crimp ring in the die body.

    I bought this and a 38 special sizer or expander die here to attempt to make a die or two I needed. If you can use the 358 at all, let me know. I was hoping it was a seater die, but no luck.

  18. #18
    Moderator
    Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    14,334
    Pm sent.

  19. #19
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    No luck so far.

  20. #20
    Boolit Master brstevns's Avatar
    Join Date
    Oct 2007
    Location
    MO
    Posts
    3,340
    Still hoping

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check