Lee 358-125-RF

[reloader28]

What powder and OAL are you using in the 380? I would like to give it a try.

.935 and 2gr Bullseye. Shoots pretty good in several different .380's
My records show 653 fps, but it doesnt say which gun that was from.

[marlin39a]

If you do a search on this bullet, you'll find plenty of threads. I've tried it, and it works. I just have a favorite Noe that I like.

[mdi]

I have a Taurus 85, A Taurus 357, a very old Rossi 3" 38, a Ruger LC9s, an FMK 9mm, and an old Norinco Tokerev, and all use the Lee 125 RNFP. I just size them for the gun to be used; Taurus revolvers .358", Ruger and FMK get .357", and the Tokerev gets .359" (I have to "beagal" the mold to get the ,359" bullets). Most of my alloys run 12-16 with the harder alloy being used in the 9mms. Some use my Speed Green lube and the 9mm bulets get C-Red lube. All work quite well...

[41mag]

Well you said it in the opening post doing a mass cast. Yep that's what I use this one for. We run a Sig 226 TO with several 20rd mags and the P320 with it's 15rd mags. Between the two we can easily blow through several hundred rounds in little to no time.

I haven't shot the first one through my revolvers but have killed a pound or more of Bullseye at 4grs shooting these in my 9's.

[farmerjim]

"Well you said it in the opening post doing a mass cast. Yep that's what I use this one for."

Me too.
I use 2 6 cavity molds at the same time with my Lyman mag25. When one is cooling, the other is filling.