Need some rim fire cases that have been through de rim die only-

[tiger762]

I know this is an old thread, but this here cannot be overstated. What I see on Ebay are Lee 224 sizer dies that have been opened up with something like a Dremel grinder. You need something that takes the 0.224 brass down to 0.220 so that there is enough difference in diameter to swage back out to 0.224". What slays me is how much the modified Lee sizers are fetching. My RCECO one was $85. I am sure it is a stocked item as common as 22cal is.

Be careful with the de-rim dies on eBay. Not all of them make a jacket the will work. Most of them make a jacket that is 0.224 inch, or larger, in dia which is too big to fit the core seat die on most swage sets.

Lafaun

[lup]

Is there a demand for derimmed .22lr for swaging? Ive got more than I currently need.

[DukeInFlorida]

I have traded 22 LR brass that has been derimmed, annealed, and SS pin tumbled (ALL the work has been done, ready for stuffing) for 5.7 X 28 FN cases in the raw condition. Still willing to do more of that trade if anyone has 5.7's available.