Burris MTAC 1-4x Scope-which reticle:ballistic AR or CQ?

[aap2]

I'm buying a Burris MTAC 1-4x Illuminated scope on my AR-15 for informal target shooting,hunting use (no competition use) and I can't decide between the AR-ballistic and the CQ-ballistic reticle. Anyone have any experience with either one. I can't post pics. Midway has the one with the AR-ballistic reticle on clearance. Any help will be appreciated. I bought a bunch of AR15 lowers for several projects; next is 300 BlK for boolits.....the optic stuff is new to me. Thanks.

[Ben]

Mine isn't on an AR, but here goes :

A few weeks ago, I shot my Siamese 98 Mauser 45-70. I use an M - Tac Burris scope, 30 mm tube, with etched in the glass illuminated reticle.

Talk about a Deer killing scope !!!!!!!!!!!!!!!!

My load was 24 grs. of 2400 with a small tuff of dacron softly seated over the powder charge. Accurate 405 gr. V wide flat point sized .4598 ".
Wolf Large rifle primers.

I zeroed the gun dead center at 50 yards.
Moved the target stand to a full 100 yards, used the lower dot to verify my load would be
in the kill zone at 100 yards, fired 2 rounds and put the rifle away.



Here is my 100 yard target with the 2 bullet holes :



Here is my Accurate , 405 gr. bullet :

[TXCOONDOG]

Ben,

Nice shooting but you could just throw that bullet and kill something

[Ben]

It's a BAD BOY ! !

[aap2]

Thanks Ben: That CQ reticle is the one to have on the MTAC scope. I just looked thru one at the range this morning and ordered one.