I recently picked up a 94 winchester in 38-55....need to do a better slug of barrel but as of now it looks @ .380. Want to run some paper patch boolits through her mostly to help polish the bore up some from years of not being cleaned much plus have always wanted to give it a try. Don't mind loading it one at a time plus it will be a learning deal. Don't want to invest in a mold right now but I have a lee 200gr .358 mold for 38spec. Cast some up and they come out at .3595 or so with 20.1 lead. Can I patch that up enough to work. Looks like it but would probably have to do 3 wraps of paper but most stuff I've watched says 2 wraps. Not looking for killer accuracy so that's not really an issue. Just want to give it and try before I try it for my 45-70 sharps. Probably will shoot smokeless at first so now I see I probably put this in the wrong section.