Interest for 9mm /357/ 38spl Round nose SWC mold (MP molds)

[MiHec]

Is there interest for such mold out there??
I have cherries and blocks ready.
I did it for a customer from Sweden for PPC competition.

We can do 6cav brass or 8 cav aluminum........

.359 as cast weight 140 grains with WW alloy and aprox 135 with lyman #2 alloy.

It cycles nice in my 9mm Tanfoglio limited custom

[woody290]

I think I would like a 8 cav aluminum........

[Lagamor]

I would be interested in an eight cavity.

[GWM]

Would you consider doing 4 cav aluminium?

[MiHec]

Would you consider doing 4 cav aluminium?

I can cut you 6 cav Lee style for same price. or brass

[MiHec]

Plying around with this one as we speak.

[Low Budget Shooter]

Interesting

[castalott]

Reports on how it shoots? Anyone try loading 38 Special?

[Gamsek]

Works fine in my F92 and G17, nice clean holes, accuracy on pair with my 9mm SWC, 10m distance, I am not an expert and this was just function test so far, but it works fine. Plinking and competition type of bullet, not finicky to load

[Sam Casey]

Around here in MI the 9mm factory stuff sell pretty cheap. Not worth chasing the empties.

[Gamsek]

Casted today with that mold...once I figured out proper lead flow on my electric furnace, around 10th pour, it just started to drop perfect bullets, perfect bases
Three to five taps and they were all out.

Mold is a bit lighter, compared to my 6cav SWC, also MiHec, copy of H&G#278, so it's easier on wrists

Yes preheating it is almost a must....got a nice pile that I powder-coated....

So casting with it - usual custom brass experience, prewarmed on a hot plate, and I casted with 370 degrees Celsius.

[Loudy13]

I don't really need one but I kind of want one

[woody290]

Same as Loudy13, don't need it but would like the brass one.

[Forrest r]

I'd like to have an 8-cavity al mold. It would make a pile of bullets in a hurry.

[Lagamor]

This would be a fun bullet to use on "Battleship" splatter targets.
Got an ex-special forces friend that I like to compete with. I'm almost as good as him, but not quite.

[alamogunr]

I would like to try an 8 cavity aluminum mold. How much $ or €?

[bullseye67]

Good evening,
I would like a 8 cavity aluminum.

Thank you.

[jmort]

Any chance on a gas check option?

[Graakall]

How does the boolit perform at ppc for the swede?

[Gamsek]

I can send few free samples-inside EU only.

Have few as cast and a lot powder coated, sized to 358".
ATTACH]191498[/ATTACH]