Graf & SonsLee PrecisionRotoMetals2Inline Fabrication
StainLess Steel MediaADvertise hereTitan Reloading

Page 1 of 3 123 LastLast
Results 1 to 20 of 50

Thread: Post your 0.358" rifle chamberings resume ?

  1. #1
    Boolit Master
    Join Date
    Jun 2012
    Location
    The Willamette Valley, in Oregon
    Posts
    354

    Smile Post your 0.358" rifle chamberings resume ?

    I have a decent variety of 0.358" rifles, at least comparable to any other caliber of mine:
    - .357Mag, .356Win, .350 Rem Mag
    If I could hunt (& plink) with only one caliber, the choice is a no-brainer IMO.

    A friend of mine is a certifiable .35 loony & was the first firearms thing we found about when we met:
    - .35 Rem, .356 Win, .358 Win, .35 Whelen, .350 Rem Mag, .358 Norma Mag.
    He's been wanting a .357 Mag rifle for a while; I keep teasing him about that hole in his collection.

    Don't have to list rifles, but am wondering who here has the most complete 0.358" coverage?

  2. #2
    Boolit Master
    DerekP Houston's Avatar
    Join Date
    Nov 2015
    Location
    Houston, Texas
    Posts
    2,711
    rifles? I only have the rossi SS 357 magnum so far.....half dozen revolvers in 38 special and a few in 357 magnum. I'll be adding more down the road I'm sure.
    My feedback page if you feel inclined to add:
    http://castboolits.gunloads.com/show...raight-Shooter

    Thanks Yall!

  3. #3
    Boolit Master
    Join Date
    Nov 2011
    Location
    SW Florida
    Posts
    250
    Have a pair of 35 Whelen Mausers, one I built and one I bought, as well as a 358 Winchester Mauser that I bought.

  4. #4
    Boolit Master
    Join Date
    Apr 2008
    Location
    Wisconsin
    Posts
    254
    For some reason and not on purpose I have gravitated over the years to the 35's. A list, which includes rifles.....
    Marlin 1894C 357 mag
    Marlin 336 SC 35 Remington
    Remington 673 Guide gun 350 Rem Mag
    Winchester 1895 35 Whelen
    Brno 602 ZKK 358 STA, IMHO, your friend really does need to add a 358 STA to his collection.
    Looking to add to the list, a Savage Hog Rifle, 308WCF, which of course will become 358 WCF.
    Crash87
    "Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

    "LIBERALS ARE ALOT LIKE SLINKIES - NOT REALLY GOOD FOR ANYTHING BUT THEY BRING A SMILE TO YOUR FACE WHEN PUSHED DOWN THE STAIRS."

  5. #5
    Boolit Master




    Scharfschuetze's Avatar
    Join Date
    Apr 2012
    Location
    Puget Sound
    Posts
    3,363

    358 Calibre Rifles

    I once had a 35 Remington built on an Argentine 1891. I also once had a Ruger Model 77 in 358 Winchester.

    What I have now is a Marlin Cowboy 357 rifle and a custom made Mauser in 358 Whelen. Both are great shooters.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Mauser 35 Whelen 02 800-90%.jpg 
Views:	21 
Size:	81.0 KB 
ID:	186415  
    Keep your powder dry,

    Scharf

  6. #6
    Boolit Master


    Nueces's Avatar
    Join Date
    Dec 2006
    Location
    Texas Hill Country
    Posts
    1,539
    I didn't start out to collect 35s, but I got 'em anyway.

    357 Magnum: Timberwolf TD Pump Carbine, Marlin 1894C Carbine, Browning 1892 Carbine, Browning 1885 Hunter

    35 Remington: Marlin 336RC Marauder

    35 Whelen: Ruger 77SR

    Others are in the pipeline. The Winchester 71 Deluxe in 348 WCF is a kissin' cousin.

  7. #7
    Boolit Master Texas by God's Avatar
    Join Date
    Mar 2016
    Location
    Texas
    Posts
    3,093
    .357 Ruger Blackhawk, S&W model 67 .38 special, Rossi Puma .357 lever, and a JES/Rem700 .358 Win. I used to have a Mauser 98 .358 Norma. I like the .35s too! Best, Thomas.

  8. #8
    Boolit Master 35 shooter's Avatar
    Join Date
    Jul 2013
    Location
    collins ms.
    Posts
    1,922
    I'm a huge fan of the 35's, but i only have one for now, a 35 whelen Encore.

  9. #9
    Super Moderator




    Buckshot's Avatar
    Join Date
    Mar 2005
    Location
    So. California
    Posts
    11,534
    Have a 35 Rem built on a SR Mauser (1894 Brazilian) :



    And a Rossi M92 Short rifle in 35/357.



    ..............Buckshot
    Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always

    Proud former Shooters.Com Cast Bullet alumnus and plank owner.

    "The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."

    Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance

  10. #10
    Boolit Master pietro's Avatar
    Join Date
    Mar 2008
    Location
    New England
    Posts
    2,906
    .

    Not complete by any means, but I have a Marlin 336 in .35 Rem, a Remington 141 in .35 Rem, a .356 Winchester BB94 & a .358 Winchester Model 100 Carbine that P.O.Ackley converted (bored/rifled & gas port rework) from a .243 for me, about 45 years ago.


    .
    Experience is a wonderful thing - It lets you recognize a mistake, when you make it again.

  11. #11
    Boolit Master

    farmerjim's Avatar
    Join Date
    Nov 2012
    Location
    St. Francisville, Louisiana
    Posts
    1,110
    Only 2
    357 mag Rossi, and a 357 Maximum Handi.
    There is no difference between communism and socialism, except in the means of achieving the same ultimate end: communism proposes to enslave men by force, socialismóby vote. It is merely the difference between murder and suicide. Ayn Rand

  12. #12
    Boolit Master GhostHawk's Avatar
    Join Date
    Mar 2014
    Location
    Fargo ND
    Posts
    3,488
    I have a Handi rifle in .357 mag, a Talo barrel. She is a dream to shoot. Stacks em into one hole if I can do my part.

    Thinking hard about having JES rebore a shot out Winchester 94 WWII era into a .35-30-30.

    I also have a 9mm stubb barrel for handi rifle that is nice, light, short and fun. 16.5 inches technically it is a .356 but it likes .358 or bigger cast boolits.

  13. #13
    Boolit Buddy bucklind2's Avatar
    Join Date
    Mar 2012
    Location
    38558
    Posts
    64
    I only have 1 rifle that is 35 caliber. It's a Stevens 200 that I rebarreled to 358 Winchester.

    Sent from my SM-G935V using Tapatalk

  14. #14
    Boolit Master MarkP's Avatar
    Join Date
    May 2009
    Location
    Omaha NE
    Posts
    898
    I have (7) 350 Rem Mags and (2) 357 magnums...... just saw the New Rem 700 CDL SF in 35 Whelen, really sharp looking rifle with the walnut stock and the stainless fluted barrel.

  15. #15
    Boolit Master
    Join Date
    Aug 2008
    Location
    upstate NY
    Posts
    197
    I have a 725 Remington with a mid weight 24 inch barrel in 35 Whalen. I'm mounting a scope on it today. Going to shoot some RCBS 35-200's in next time out to the range.

  16. #16
    Boolit Man
    Join Date
    Jun 2016
    Location
    Lenoir NC
    Posts
    85
    Remington model 8 in 35rem an a couple of. 357 wheelguns

  17. #17
    Boolit Master Harter66's Avatar
    Join Date
    Jan 2010
    Location
    Walker Lake Nv. or just about 5 miles west of the exact middle of nowhere.
    Posts
    4,077
    38/357 that I shot a fair number of 9x23R in . I have a 358 Win . I was in possession of a very nice double set trigger 9x57 I didn't want to give that one back .
    In the time of darkest defeat,our victory may be nearest. Wm. McKinley.

    I was young and stupid then I'm older now. Me 1992

    About that rally point, the soap and mail boxes fall on blind eyes and deaf ears,the ballot box is manipulated,it would seem we are fast running out options....

  18. #18
    Boolit Master wrench man's Avatar
    Join Date
    Nov 2011
    Location
    Eugene Orygun
    Posts
    488
    Marlin levers in 357 Mag, 35 Remington and 356 Winchester and a Savage 110 in 35 Whelen.
    ASE master certified engine machinist
    Brake & Alignment specialist, ricer to class 8

  19. #19
    Boolit Master
    Join Date
    May 2013
    Location
    Eastern WY
    Posts
    494
    3 - Savage 99 .358, 3 - Marlin 336C(pre-safety), Marlin 336C 35-284x2"(pre-safety), Rossi 92 - 357 16", M98 35 Whelen, S&W 686 .357, Taurus 851 .38 Spcl, XDM 9mm, Sar 9mm

  20. #20
    Boolit Bub
    Join Date
    Apr 2005
    Posts
    41
    I only have one,Marlin 35 rem.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check