Taking Orders for the Lee Six-Cavity BD45CM

[AnthonyB]

I lifted this from the other board to get it posted here:

Fellas, I think we have enough interest to start collecting orders for the BD45CM, and we may get there with our version of the 45-230 CM as well. Harley45 is gonna handle the original BD remake; I'll do the other two. Price will be $56, including shipping, and personal checks are fine. l won't cash checks until the order goes to Lee, anyone with a change of heart before the order goes gets their check returned or destroyed.

Pictures are available at http://www.gilanet.com/tundraj/BD45_Molds/ . The picture labeled BD/RCBS No Crimp Groove is now officially known as the BD45CMBB, the same design with a flat base is the BD45CM. Give me your preference regarding bevel or flat base when you send the check, and bevel base guys let me know if you want to jump to the flat base if it looks like we won't make the numbers with the bevel base. If you don't have a preference on the base, PLEASE choose the bevel base - the flat base will make the numbers on its own, and the bevel base fans need help! Our version of the 45-230 CM is posted at the link above and named simply RCBS. The RCBS version is an oustanding revolter and pistol boolit; ours will be as close to the original as Lee can make it and will offer six-cavity production rates. Checks and orders received will be posted using the zip code SOP.

Send orders to:
MAJ Anthony Bennett
12850 Valleywood Drive
Woodbridge, VA 22192

Orders received as of 16 March:
49862 - 1 BD45CM
04441 - 1 BD45CM
74429 - 1 BD45CM
89460 - 1 BD45CM
37663 - 1 BD45CM
29584 - 1 BD45CM
71201 - 1 BD45CM
84003 - 1 BD45CM
23124 - 1 BD45CM
38001 - 1 BD45CM
38001 - 1 45-230CM First Order!
78412 - 1 BD45CM
Tony

[45 2.1]

[gregg]

Just looking at the picture I would say the the BD 45 CM is just like the RCBS bullet BUT equal width bands and a crimp groove??????

[AnthonyB]

Gregg, I think the posted picture is the base and lube groove of the BD45ACP with the RCBS nose and a small dirt groove to help remove fouling. A lot of folks are waiting for Harley45's re-run of the original BD, but this design gives up nothing significant in meplat size and the RCBS nose is actually larger than the BD. The RCBS boolit has worked perfectly in every pistol I have tried; I can't say the same for the BD45ACP as cut by Lee. Tony

[45 2.1]

The BD45CM above has no crimp groove. It is the RCBS CM nose on the BD base.

[gregg]

I'm in.. Just bowed out of the 452423 order. I think this would
Be a better bullet for My 45ACP Springer. Have the 45 240 gr RF lee
and Lyman 45 Keith for my 45 Colts.

[AnthonyB]

gregg, I'll let you know when the check arrives. Your order will get us to 14 - we are making progress and should have the required numbers in a few more weeks. Tony

[old goat]

...Gentlemen: This looks to me as if it would weigh a little more than the RCBS CM. Has anyone an educated guess what it would weigh cast of WW?
...Thanks in advance.


...old goat

[45 2.1]

4 to 5 grains heavier.

[AnthonyB]

Fellas, we are at 14 when Gregg's check makes it in, and Sean's check is still out there in postal limbo somewhere. We seem to have hit the "middle of the order lull" and will have to wait for the numbers to creep up before we get all the last minute orders. There is a lot of interest on the 311440, and I have promised to honcho that order once the BD45CM is complete. I would try to run both, but we have a house closing and move coming up at the end of this month that makes two orders just too complicated. Only 11 more BD45CM orders required....
Anyone straddling the fence on this order should e-mail me and I'll send samples of the RCBS 45-230CM. The Lee custom is really nothing more than the BD base with the RCBS nose and no crimp groove; you could also consider it as the RCBS with the crimp groove removed and a different lube groove.
I'm no expert on anything other than Pentagon staff work, but consider this to be the best all-around 45 ACP boolit ever produced. The original BD45ACP is very good, but may require alterations for reliable feeding and slide lock functioning in some pistols. This one gives up very little in meplat size for easier feeding and 100% slide lock function in the five 1911s I have tested. All you hardcore original BD45ACP fans should know that BD was one of the first to send a check. I can't speak for BD, but I think the original design is highly specialized while this one is for much more general use. You shouldn't have to tune your pistol for this one to function reliably.
Of course, I may be full of crap and the design could be ***** once you get the mould, but I think all takers will be happy.
Tony

[Hardcast]

Tony,
There is a possibility I may try to get in on this one. My neighbor and good friend, ace boolit caster JimL has some 230 BDs coming so we can test them. I was wanting the original BD design and we were going to test for functioning, accuracy and such. But the BDs have not yet arrived so I am still sitting on the fence. (and my butt is getting real sore) My thought was, if there were any funtioning problems in any of our guns due to the size of the nose or meplat of the BD, then I would order your modified BD design. If there were no problems, then I was going to wait for another group buy on the original. If you are willing to send me a few samples of the RCBS 230 CM, we could do some comparisons and try to make a decision.

Hardcast

[AnthonyB]

Hardcast, I'll send samples of both if you want; you pay postage only. Email an address and I'll get some out. Send me the postage once they arrive. The offer is open to anyone. Tony

[Hardcast]

Tony,
When I tried to e-mail you I got this :

"Sorry! That user has specified that they do not wish to receive emails. If you still wish to send an email to this user, please contact the administrator and they may be able to help."


Apparently there are some glitches to work out yet. I tried my own profile and got the same results.

[AnthonyB]

Send to anthony bennett at comcast dot net. Remove all spaces, and the dot is a period of course. Tony

[Hardcast]

Send to anthony bennett at comcast dot net. Remove all spaces, and the dot is a period of course. Tony

E-mail sent. I went to my user CP and clicked on options. Apparently they were lost when the changeover was made. I think mine is fixed now.

[alamogunr]

Tony, I see that I am still the only one in for the 45-230CM so far. If it helps to make the numbers change me to 2 of the BD45CM. I can either use it or hold it for someone who wants one after the order is placed. I am sort of on the front end of experience and wanted to compare, but it is no big deal.
John

[AnthonyB]

John, you and I are the only ones interested in the RCBS clone so far. I may come back in a few months and try to run that one again - I think more people would be interested if we didn't have so many custom orders going in at the same time. Tony

[AnthonyB]

Fellas, the requested samples went to the PO today. Tony

[Hardcast]

Excellent ! From what state are they being sent ?

[AnthonyB]

Hardcast, they are coming Priority Mail from Northern VA. You should get them by Monday at the absolute latest, and I would expect Saturday. Let me know how they work for you. Tony