lee expander

[Scorpius]

cant recall where, but I remember someone mentioned Lee had some sort of mouth expander that was universal to expand the mouths for loading lead bullets, problem is I cant seem to locate it at midway or elsewhere.

Anyone got a link?

Thanks,

[jcren]

http://leeprecision.com/universal-ca...nding-die.html
Here is the Lee link.

Geez, nothing is working right today, hafta copy and paste

[Scorpius]

http://leeprecision.com/universal-ca...nding-die.html
Here is the Lee link.

Geez, nothing is working right today, hafta copy and paste

PERFECT!!! Thank you! now off to midway to get more stuff I don't need for this addiction.

[robg]

Works well use one for my 223 and 308

[white eagle]

I use one as well
it works good when I need it

[Guesser]

I have 2, one each set up for large and small. they get used......

[wrench]

Buy it from Al at NOE: http://noebulletmolds.com/NV/index.p...sort=2a&page=3
and while you're there pick up a few of his excellent expander plugs that turn the Lee die into an actual expander die...it's about all I use these days.

[targetfreak]

Even better is the Lyman "M" neck expanding die.

[Pavogrande]

I agree with targetfreak the stepped exp plug works much better -- but you do need a plug for each caliber --

[MT Chambers]

It really isn't a neck expander, it is a flaring tool, it flares the case mouth but does not expand the neck.

[kenyerian]

+1 on the Noe

[T-Duck]

With the NOE expander do you order the size you want the neck to be? Does the brass spring back at all where you would need to go a little larger?

[Hannibal]

I agree with targetfreak the stepped exp plug works much better -- but you do need a plug for each caliber --

I have been searching for a method to order just the expander plugs I need without ordering the entire die, as I have both an M-1 and M-2 die body. I presume just the expander plug would be cheaper, but as yet, I have not discovered how to order just the plugs. I don't need a specialized size, so Lyman's 'standard' plugs should work just fine. . . . . if I could figure out how and where to order them.

Any replies with experience with this problem I would greatly appreciate.

Thanks and sorry if this is a 'thread hijack'.

[Moonie]

I have been searching for a method to order just the expander plugs I need without ordering the entire die, as I have both an M-1 and M-2 die body. I presume just the expander plug would be cheaper, but as yet, I have not discovered how to order just the plugs. I don't need a specialized size, so Lyman's 'standard' plugs should work just fine. . . . . if I could figure out how and where to order them.


Any replies with experience with this problem I would greatly appreciate.

Thanks and sorry if this is a 'thread hijack'.

I know it has been done, at least in the past, by other members on here. My solution is to use the Lee with NOE expanders, and the PTE with NOE's PTE's rather than Lee's. Might need to call Lyman to get the exact ones you need. Or simply go the NOE route, you can get the Lee universal expander and the NOE plugs. His PTE's fit the pistol PTE dies.

[725]

'bout to use my Lee expander this evening.

[Motor]

It really isn't a neck expander, it is a flaring tool, it flares the case mouth but does not expand the neck.

VERY GOOD POINT !!!!!!

If you need to expand the neck you will need a real neck expander. Often though all you really need is the mouth flare.

I use both types of expanders and do like the "M" style (with step).

Motor

[gloob]

With the NOE expander do you order the size you want the neck to be? Does the brass spring back at all where you would need to go a little larger?

Yes there is spring back after the plug is removed. NOE lists the actual diameter of the expander plug and flare steps. They and the entire reloading industry will tell you to order 2 mils smaller than the bullet.

I would suggest you get expander same size as your bullets. If you use 356 bullet, use a 356 expander plug. NOE will list the size of the expander and the flare step. For instance, they sell a plug that is 356/360. Feel free to ignore my advice and follow industry recommendation, which will sell you a 354/358 expander for a 356 bullet. It's all very confusing and dangerous and scary and ambiguous, so I don't blame them for being safe or you for listening to them.

If you're dumb enough to listen to me, you will notice you can't buy expanders same size as bullet, except in 9mm and 45ACP, and other select calibers in rifle/pistol where there are different calibers that are close in size. That's cuz they don't make em big enough. Yeah, you gotta go custom for most calibers.

[sandman228]

I own the lee universal expander and use it mostly for loading lead bullets in 35 rem cases . it works good but the trouble I have is I can only thread it in the press a turn or 2 anything more and it over expands ,even with the adjustment turned way back . I plan on using it for 30 30 lead bullets loads as well here soon I dunno if i'll have the same issue or not .

[sharps4590]

As others have said yes, it is only a flaring/mouth belling tool but, it works pretty good. It's near impossible to find expander plugs for some of the weird calibers I shoot. For me it's been a life saver.

[calgunner]

I use NOE when I can but they don't do custom sizes. Buffalo Arms has a much larger inventory of lyman m-die expander plugs that will fit in the M1 and M2 bodies. If he is out of stock on the size I need I can backorder from them. Since I use Lee full length & neck sizing dies I also can order from them a custom made expander rod in any size I need and them use their universal die to flair the mouth. Hope this helps.