Titan ReloadingWidenersReloading EverythingLee Precision
MidSouth Shooters SupplyLoad DataRepackboxRotoMetals2
Inline Fabrication
Results 1 to 19 of 19

Thread: .244 - 60 to 90 grain PB and GC interest

  1. #1
    Boolit Master

    Join Date
    Mar 2005
    Location
    Peace River, Alberta
    Posts
    2,114

    .244 / 6mm - 60 to 90 grain PB and GC interest

    Is any one interested in a 0.244" to 0.245" diameter group buy for 60 to 90 grain Plain base or Gas Check bullets for the 244 Remington?
    NOE is sold out but has several bullets that see suitable.
    A .245" diameter Loverin style bullet of 75 grains with gas check or plain base would be my choice.
    And, yes, I do powder coat loverin design bullets - Great accuracy, no leading, and no puff of smoke.

    NOE has a 105 grain in stock but I would like a lighter bullet.

    http://noebulletmolds.com/NV/index.php?cPath=25
    Last edited by 10x; 01-27-2017 at 04:33 PM.
    Go now and pour yourself a hot one...

  2. #2
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    I am interested in this, I would like a 70-80 grain bullet with a GC. I looked at the 105 and will wait for a lighter bullet.
    "Yes or no will almost always suffice as the answer"

  3. #3
    Boolit Master

    Join Date
    Mar 2005
    Location
    Peace River, Alberta
    Posts
    2,114
    There may be a chance for a short run of Freechex III tools if there are enough orders.
    Go now and pour yourself a hot one...

  4. #4
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    I am waiting on the 30 cal freechex III to run, wouldn't mind another for 6mm
    "Yes or no will almost always suffice as the answer"

  5. #5
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    I see this is going to take awhile to get enough interested
    "Yes or no will almost always suffice as the answer"

  6. #6
    In Remembrance


    Join Date
    Oct 2008
    Location
    Michigan Thumb Area
    Posts
    5,948
    Since the 244 and 6mm are the same cartridge, perhaps that would get some responses.Robert

  7. #7
    Boolit Master

    Join Date
    Mar 2005
    Location
    Peace River, Alberta
    Posts
    2,114
    Quote Originally Posted by Hardcast416taylor View Post
    Since the 244 and 6mm are the same cartridge, perhaps that would get some responses.Robert
    Thread title edited to reflect that. Thank you
    Go now and pour yourself a hot one...

  8. #8
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    bump for interest
    "Yes or no will almost always suffice as the answer"

  9. #9
    Boolit Master

    Join Date
    Mar 2005
    Location
    Peace River, Alberta
    Posts
    2,114
    Quote Originally Posted by Loudy13 View Post
    bump for interest
    Thankyou
    Go now and pour yourself a hot one...

  10. #10
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    No need for thanks, I want this mold as much as you do I will continue to monitor its progress.
    "Yes or no will almost always suffice as the answer"

  11. #11
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Bump for interest
    "Yes or no will almost always suffice as the answer"

  12. #12
    Boolit Master
    Join Date
    Feb 2017
    Location
    NWO sunset country
    Posts
    716
    interested in this as well Hope I can keep track of this as I am still learning my way around here on this site (old dog new tricks nah old dog all tricks)

  13. #13
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Brass you can select subscribe to this thread at the top of the page and then whenever someone posts on here you will get an email. Or you can go to forums and under group buy discussions you will be able to find it.
    "Yes or no will almost always suffice as the answer"

  14. #14
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    I Think I have been spoiled over the last 6 months I have been lucky the molds I want to buy have been either on a group buy already or in stock. This one not so much. Oh well they say patience is ...... don't have enough time to remember whatever that saying was lol
    "Yes or no will almost always suffice as the answer"

  15. #15
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Bump for interest, Have a great weekend everyone!!
    "Yes or no will almost always suffice as the answer"

  16. #16
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Bump for interest
    "Yes or no will almost always suffice as the answer"

  17. #17
    Boolit Buddy sisterjim's Avatar
    Join Date
    May 2012
    Location
    Tasmania
    Posts
    108
    I am also interested in the plain base, is 243 too small to HP. Just bought a MiHec Jack Rabbit mold in 25 with inset bar HP which functions perfectly.

  18. #18
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Bump for interest
    "Yes or no will almost always suffice as the answer"

  19. #19
    Boolit Buddy



    Join Date
    Mar 2016
    Location
    MN
    Posts
    481
    Bump for interest
    "Yes or no will almost always suffice as the answer"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check