I was wondering if 32 H&R reloading dies will work on the 327 Fed Mag? There seems to be more choices for the 32 than the 327. Thanks in advance.
I was wondering if 32 H&R reloading dies will work on the 327 Fed Mag? There seems to be more choices for the 32 than the 327. Thanks in advance.
I know Lee dies work for both. Not sure about others but they may be long enough.
I have Lee and Lyman 32 dies, they work for 327
I use Dillon even though they say they won't work. they work fine.
It's like 38/357. The shorter round's dies ought to work for the longer round, but not necessarily the other way around.
Thanks for the info, I was thinking that is what it was. Charlie
Just reloaded some .327 Mag ammo on the Hornady die set. As others stated, they will will work for .32 S&W long, .32 H&R mag, and 327 Mag.
"Semper quaerendo plumbum"
So far I've loaded 327 FM with RCBS and Lyman die sets labeled for the 32 S&W, also with a set of 32 S&W dies for a Lyman TruLine Jr! Since it's a straight wall case, it should always work if the FL sizer has enough length to accommodate the FM length case.
Froggie
"It aint easy being green!"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |