Well new to rifles so of course I bent my first ones running them through my lyman.
Instead of trying different ways of floating the top punch I decided to go the push through and pan lube
try and keep the machine for handgun for now.
I took my simple green that turned out perfect and cut a circle to match the mess kit top I planned on using.
Took my drill and drilled holes for the bullets and slide them in - looked good so far.
Dug out the old electric fry pan poured some water in and set the pan in.
Set @ 212ish and watched.
Figured the bullets would warm with the lube and help according to search function.
Pulled the pan and didn't even tip any over - let cool for about 15 min.
A little wiggle and straight pull up and WOW! Perfect!! lube only stuck in the grooves and push through marks
stayed as shinny as if they just went through.
Now we'll see what the ol winnie will do with .001 runout instead of .012-.014.
I'm happy happy - maybe an idea in here can help some one else.
Thanks guys