New GB NOE 502-500-SWC RG4 HB with 6 sets of pins to cast 6 different boolits arrived on Wednesday afternoon
SATURDAY
In the neck down the spine and lodged just under far side skin. Retained weight 261.8g Weight about 150#
Used the 502-500 mould with 301 HB pin. Cast weight with 40:1 was 290g retained weight 261.8 Max diameter 0.941"
Shattered neck / spine 14 or so inch of bone spine from entrance hole (look at picture just under and at rear of mould) , top off one lung and then punched a 50 cent hole through the off side shoulder bone. Best guess was it stretched the skin out 10 to 12 inch before coming back to rest
Blood under skin of off side all the way to right ham
Three lead chips found in right ham that had traversed the gut cavity - it had punched a small hole and we washed it out with a hose just after gutting.
Minimal lost meat
SUNDAY
Weight 261# Big for around here and fat like range beef from beans & clover.
sorry no pix was taken
385 spec 368 as cast 40:1 retained weight 344.0 Used medium HB pins
Maximum diameter across the 385g mushroom 0.814
Same load as the 301 on Saturday - 100g pyrodex,
Observation: Near shoulder bone completely fragged, top off both lungs, off side shoulder bone completely fragged and looked like only pushed out skin about 3" so it was spent.
The 385 shoulder shot was on purpose by a friend in hopes of recovering a heavier one. Would not have tried it if there was any idea of the amount of meat lost. That said it was an educational mistake.
BTW the 301 & 385 shoot to same POA at 25 & 100 yd - go figure