Any one have or know of a good video for take down and cleaning of this wonderful firearm?
You tube doesn't have much.
Any one have or know of a good video for take down and cleaning of this wonderful firearm?
You tube doesn't have much.
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
How far do you need to dismantle it?
The action will just drop out if you remove the large screw on the right. There is a picture of a dismantled Mk II near the bottom of this page http://www.rifleman.org.uk/BSA-Inter...sI_and_II.html. The hole at the back of the action allows a clear path for a cleaning rod to the breech.
Lots of good info there. Thanks
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
Don't need much maintaining, just take the tigger assembly out and use a light oil on it sparingly. Clean the bore from the rear, and make sure to put a drop of oil on the extractor/ ejector once a year.
NRA High Master XTC
DR# 2125
OK will do, thanks.
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |