So...hanabi...this was a pretty good response to your questions...what do you glean from all this?
charlie
So...hanabi...this was a pretty good response to your questions...what do you glean from all this?
charlie
a m e r i c a n p r a v d a
Be a Patriot . . . expose their lies!
“In a time of deceit, telling the truth is a revolutionary act.” G. Orwell
I didn't know I had a "small" choice with the Uniflow.
Looks like I need another measure. Thanks for all the help.
Joe O
I used to use the Uniflow with the small cylinder.
I now use the RCBS Little Dandy.
EDG
I bought my Uniflow nearly 40 years ago. It came with both a large and small cylinder assembly back then.
Recently, I've been loading pistol rounds with flake powders - Unique and 700-X. Both meter poorly in the Uniflow.
For all these years, I've had the large cylinder installed in the Uniflow. It never even occurred to me to use the small cylinder for pistol rounds, and after nearly 40 years, that small cylinder was still in its originally sealed package.
After reading the posts on this thread, I've installed that small cylinder on the Uniflow in the hopes it throws more consisrent charges with flake powders for pistol rounds.
Most of my pistol charges run between 4.0 and 5.5 grains for various pistol calibers.
So, I'll use the small cylinder for the first time at my next reloading session.
I hope there's an improvement.
Since my rifle charges are under 50 grains, it may be worthwhile just to leave the small cylinder installed, as I understand it has a 50 grain capacity.
Thanks for the ideas!
Bayou52
Bayou52
NRA Life Member
"Keep Calm and Reload"
Have both Hornady on a LNL and a stand alone uniflow. Both work ok for bullseye or unique as long as you rap the measure with your hand several times on the powder measure to pack it in.
I used the Lyman 55 for awhile and when I got into competitive shooting, I went to the Lyman 55 with the Culver insert, that I purchased directly from Homer, himself.
To my way of thinking, if you purchase the best available at that time, it will cost a small fortune, but it'll last a lifetime and after a year the money spent and sacrifices made to spend that kind of money will be but a distant bad dream.
The Hornady LnL handles bullseye with spot-on accuracy - just as good as my Lyman 55 with Culver insert.
If one had a desire only for a single stage powder measure - I would look at powder measures such as the Harrell's and others similar.
Stick powder's have always been a PITA for spot-on throws.
http://www.harrellsprec.com/
I've had the same problem with the always inaccurate RCBS, while my Dillon 550B sometimes doesn't drop a charge at all. Dillon, however makes an upgrade they're calling 'fail safe,' so obviously they're aware of the problem.
I've had the best results with the Lee Perfect, so far. The RCBS and Dillon have the best build quality when compared to Lee, but don't come close to matching the Lee for accuracy.
I have, and use, an Ideal No.5, a Lyman No.55, a Redding 3BR, an RCBS Uniflow, and a Hollywood Micrometer. I've never had any issues with Bullseye (or for that matter, any of the flake or spherical type powders) flowing through any of them.
It's the only reason I keep my Lyman 55 on the bench. The Harrell's measure does everything but tiny charges of pistol powders.
Sent from my iPhone using Tapatalk
God gave us music that we might pray without words
My Lee PPM is very accurate with BE. It will drop 1.3gr of BE all day long.
Last edited by jimkim; 10-25-2016 at 08:31 AM.
US Govt mantra: If it's moving tax it. If it's still moving regulate it. If it stops moving subsidize it
I use two different Bonanza's for most and a Lachmiller for the bigger rifle cases.
The Dillon works well with Bullseye, I had to get the extra small charge bar to get 3.5grns, but it seems to work fine.
My machine had the failsafe new right out of the box, it's about twenty years old now?, some of you must have some vintage equipment?
ASE master certified engine machinist
Brake & Alignment specialist, ricer to class 8
For me the Lee Pro Auto Disc works great for 2.7 gr for 148gr wadcutters.
My bench-mounted Bonanza has served me well for more than 30 years, and it was used when I bought it. The Bonanza Bullseyes pistol powder measure is a relatively new purchase, and I need to get some more spools for it so I can load with different charges of Unique.
My Lachmiller was bought a few years ago, and works well with larger amounts of powder such as for -06 and magnums.
Just because their old ---- getting there myself.
I use the Dillon with the small bar (not the extra small) for loads as little as 2.8 gr of BE.
Distinguished, Master,2600 club, President 100 badge holder.
I have 8 Lyman 55s and some are set for 2, 3, 3.5, 4.5, 5 and 6.5 grains of Bullseye. I have a power weight for the 55s I bought on Ebay from a guy who makes them. These are highly accurate measure with Bullseye and most other pistol powders.
I also have a RCBS Little Dandy with numerous rotors and the same powder weight. It is very good as well.
Disclaimer: The above is not holy writ. It is just my opinion based on my experience and knowledge. Your mileage may vary.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |