put me down for a four cavity hollow base.gavetta
put me down for a four cavity hollow base.gavetta
Certainly interested in a 2 cavity but would also be interested in a single cavity Uncle45Auto if you don't want to use it anymore. I live in France
A DAY WITHOUT WINE IS A DAY WITHOUT SUNSHINE
Duncan
Just the 4 cav at this time. There is no issue shipping to France that I know of, if so I'm sure Miha will let us know.
Ron Reed
Oklahoma City, OK
2 caity is possible. No problem shipping to France
Jump on....
As FYI, these are results firing the MkI hollowbase bullet, cast 1:30 tin/lead with 5 grains of Unique, in Hornady cases, the mold from the previous group buy. Revolver is a Webley MkVI originally built in 1914, refurbished in 1940 for WW2 re-issue.
Left target was fired at 50 yards, standing DA, the right target was sandbagged at 100 yards.
Use a "fine" sight with the front blade blade pulled down tight into the lower notch at 25 yards, use a "coarse" sight at 50 yards with the front sight leveled across ears of barrel catch, and a "full" sight at 100 yards, levelling front sight base across ears of barrel catch at 100 yards.
Attachment 180785Attachment 180786Attachment 180787Attachment 180788
Last edited by Outpost75; 11-15-2016 at 08:28 PM.
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
The bullet is also accurate in a relined .455 rook rifle. 25 yard groups comparing Kynoch MkVIz and the cast bullet across the chronograph, and a ten-shot iron sight group on the 12" steel gong at 100 yards.
Almost silent in the rifle!
Attachment 180789Attachment 180790Attachment 180791
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Already put my order in a few posts back but can you also do a 225gr 450 adams HBmould?
Your best bet might be RCBS:
https://www.midwayusa.com/product/19...se-hollow-base
https://www.buffaloarms.com/RCBS_579....aspx?CAT=4125
Cant find a decent pic so go look for yourself.
Last edited by 17nut; 12-30-2016 at 04:59 PM.
This one is Closed!
PayPals are out!
If you missing one, let me know via PM.
Also over order molds are available.
MiHec--
PayPal received and payment sent. Many thanks again.
--fjruple
x-mas came early this year
Postman Pat just dumped off a big lump of brass.
My mold also arrived.. happy.
I still have some of this molds
I already have this one but, would be interested in hollow based Man Stopper full wadcuter?
Steve
"The Original Point and Click Interface was a Smith & Wesson."
Life member NRA, USPSA, ISRA
Life member AF&AM 294
Some pics, etc.
Attachment 195056
Attachment 195057
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
Mk IV is possible to make
I couldn't find drawings but, I believe it's the MkIII from above illustations. I believe the Handloader article in #305 describe it as 213 grains?
Stevef
"The Original Point and Click Interface was a Smith & Wesson."
Life member NRA, USPSA, ISRA
Life member AF&AM 294
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |