Anybody familiar with the spray on coatings such as Duracoat, Molykote etc curing temperature?
Anybody familiar with the spray on coatings such as Duracoat, Molykote etc curing temperature?
DuraCoat cures at room temperature; I think they recommend 65 - 75 degrees F for application. Norrell's Moly Resin is like 200 degrees F for plastic/wood and 250 degrees F for metal, but that's from memory and it may have changed since I used it. There are a number of YouTube videos on DuraCoat you can watch, would provide links but gotta rush to watch grandkids. The mfr websites should have exact information.
"Never attribute to malice that which is adequately explained by stupidity"
" The mfr websites should have exact information. "
This
"Don't worry what they think. In the end it is not between them and you, it is between you and God."
Je suis Charlie!
"You won't know until you Actually try it"
"The impossible just takes longer."
"Don't let them beat you down with their inexperience."
"You'll never accomplish what you don't try. " - Moldmaker
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |