Lee PrecisionStainLess Steel MediaWidenersGraf & Sons
MidSouth Shooters SupplyInline FabricationRotoMetals2Titan Reloading

Page 8 of 10 FirstFirst 12345678910 LastLast
Results 141 to 160 of 200

Thread: Lyman 310 Swap thread

  1. #141
    Boolit Master
    Join Date
    May 2012
    Location
    Outside Rolla, Missouri
    Posts
    741
    Thank you, that's definitely more than I knew before!!!!
    "In general, the art of government is to take as much money as possible from one class of citizens and give it to another class of citizens" Voltaire'

    The common virtue of capitalism is the sharing of equal opportunity. The common vice of socialism is the equal sharing of misery

    NRA Benefactor 2008

  2. #142
    Boolit Bub
    Join Date
    Jan 2018
    Posts
    28
    I have accumulated these 310 dies over the years and have never used them or have a need. I want to move them along to someone who collects and/or uses the 310 and hopefully one of you are interested. My primary goal is to get them in the hands of someone that will enjoy them and get something in exchange I can use. I would swap them for LE Wilson trimmer and/or case holders or RCBS dies and/or die parts. Pretty open. If you have something you want to move along, run it by me.

    Bottom to Top:

    Left Column:

    #2 shell holder
    429 Seater w/421 stem
    Decapper minus pin

    Right Column:

    153 Seater w/450 stem
    266 Expander
    287 Expander

    Click image for larger version. 

Name:	IMG_2456.jpg 
Views:	9 
Size:	29.0 KB 
ID:	216759

  3. #143
    Boolit Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    10,342
    Left column #2 is a #2 priming chamber. It fits the -06 case head, large primer, which is probably the most useful priming chamber they made given the variety of cartridges that use this case head, including the 45ACP.
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  4. #144
    Boolit Bub
    Join Date
    Jan 2018
    Posts
    28
    Quote Originally Posted by Wayne Smith View Post
    Left column #2 is a #2 priming chamber. It fits the -06 case head, large primer, which is probably the most useful priming chamber they made given the variety of cartridges that use this case head, including the 45ACP.
    Thank you Wayne. I have never used a 310 and relying on some research. You are correct. It will fit all -06 based cases including all .308 based cases as well as .45 ACP. Way too many to mention them all. I hope someone here wants them. I am more interested in getting them in someones hands that will use them than anything.

  5. #145
    Boolit Man
    Join Date
    Jun 2005
    Location
    Potter county Pa.
    Posts
    93
    WTT Have 310 44-40,45acp,38spec dies. Sizer ,seating & priming 30-30 dies Also 32special size and 2 seating dies for trueline press. 2 hand sizeing dies 1 30-30 and 1 32 special. 2 handles 1 lg 1 sm. 1 45-70 priming die. Looking for 35 Remington mould FN Rcbs or similar,32-20 brass,25-35 brass and bullets. 38-40 mould that casts a bullet .403 dia. or larger. My 401 mould is to small. Also need a receiver sight for 336 Marlin.
    Last edited by Rimfire; 03-21-2018 at 04:06 PM.

  6. #146
    Boolit Bub
    Join Date
    Jan 2018
    Posts
    28
    Quote Originally Posted by Rimfire View Post
    WTT Have 310 44-40,45acp,38spec dies. Sizer ,seating & priming 30-30 dies Also 32special size and 2 seating dies for trueline press. 2 hand sizeing dies 1 30-30 and 1 32 special. 2 handles 1 lg 1 sm. 1 45-70 priming die. Looking for 35 Remington mould FN Rcbs or similar,32-20 brass,25-35 brass and bullets. 38-40 mould that casts a bullet .403 dia. or larger. My 401 mould is to small.
    Rimfire, I just sent you a PM. Actually TWO PMs.
    Last edited by mew; 03-21-2018 at 01:16 PM.

  7. #147
    Boolit Bub
    Join Date
    Jan 2018
    Posts
    28
    These dies are still available for trade.

  8. #148
    Boolit Master
    jrmartin1964's Avatar
    Join Date
    Sep 2013
    Location
    Plantersville, MS
    Posts
    355
    Quote Originally Posted by mew View Post
    I have accumulated these 310 dies over the years and have never used them or have a need. I want to move them along to someone who collects and/or uses the 310 and hopefully one of you are interested. My primary goal is to get them in the hands of someone that will enjoy them and get something in exchange I can use. I would swap them for LE Wilson trimmer and/or case holders or RCBS dies and/or die parts. Pretty open. If you have something you want to move along, run it by me.

    Bottom to Top:

    Left Column:

    #2 shell holder
    429 Seater w/421 stem
    Decapper minus pin

    Right Column:

    153 Seater w/450 stem
    266 Expander
    287 Expander

    Click image for larger version. 

Name:	IMG_2456.jpg 
Views:	9 
Size:	29.0 KB 
ID:	216759
    As has already been stated, the No.2 Primer Seater will work with any rimless cartridge with the same head size as the .30-'06. The tool No.429 with No.421 plunger is a bullet sizing dies (0.429 diameter), and the plunger is designed to fit the nose of the Lyman No.429421, and is used to size the bullet base-first using the plunger against the nose (as when sizing with a bench mounted lubricator/sizer). Die No.153 is a Double Adjustable (aka Bullet Seating) die for the .270 Winchester. The No.450 Seating Stem is designed to fit the Lyman No.224440 bullet, but likely also will work with some other projectile suitable for use in the .270.

    Jim


  9. #149
    Boolit Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    2,380
    Does anybody have a spare priming chamber (PC) #10 they could swap or sell? Please answer here or with a PM. TIA!

    Froggie
    "It aint easy being green!"

  10. #150
    Boolit Bub
    Join Date
    Jan 2018
    Posts
    28
    Quote Originally Posted by jrmartin1964 View Post
    As has already been stated, the No.2 Primer Seater will work with any rimless cartridge with the same head size as the .30-'06. The tool No.429 with No.421 plunger is a bullet sizing dies (0.429 diameter), and the plunger is designed to fit the nose of the Lyman No.429421, and is used to size the bullet base-first using the plunger against the nose (as when sizing with a bench mounted lubricator/sizer). Die No.153 is a Double Adjustable (aka Bullet Seating) die for the .270 Winchester. The No.450 Seating Stem is designed to fit the Lyman No.224440 bullet, but likely also will work with some other projectile suitable for use in the .270.

    Jim
    Thanks Jim. Way more information than I was willing to dig around for. I'm really hoping someone can use or appreciate them. I am more interested in getting them into the hands of someone that will use/appreciate them than what I get in exchange. Where they sit now, they are of no use.

  11. #151
    Boolit Master mwells72774's Avatar
    Join Date
    Aug 2015
    Posts
    192
    Looking to sell or trade 2 tru-line presses, small alloy handles, 310 dies- 222, 7x57, 30-40 krag, 38/357. Getting out of tiny dies

  12. #152
    Boolit Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    2,380
    Quote Originally Posted by Green Frog View Post
    Does anybody have a spare priming chamber (PC) #10 they could swap or sell? Please answer here or with a PM. TIA!

    Froggie
    Never mind... My #10 PC somehow got mixed in with my 32 S&W stuff. I'm good now!

    Froggie
    "It aint easy being green!"

  13. #153
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,264
    Speaking of 32 S&W, who has a spare 310 set and what do I need to trade for it?

  14. #154
    Boolit Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    2,380
    Quote Originally Posted by BrassMagnet View Post
    Speaking of 32 S&W, who has a spare 310 set and what do I need to trade for it?
    I probably could put together a set if you can't find one elsewhere. I need to keep a set for my 310 and one for my TruLIne Jr (dedicated) but if there are enough left over parts I'll let you know. Would you be interested in a couple of the dies to start building a set??

    Froggie
    "It aint easy being green!"

  15. #155
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,264
    Quote Originally Posted by Green Frog View Post
    I probably could put together a set if you can't find one elsewhere. I need to keep a set for my 310 and one for my TruLIne Jr (dedicated) but if there are enough left over parts I'll let you know. Would you be interested in a couple of the dies to start building a set??

    Froggie
    Yes!!!

  16. #156
    Boolit Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    2,380
    Well Magnet Man, somewhere between the event horizon and the actual black hole in my basement there should be some boxed sets classified as trading material. I had the previously mentioned TL Jr boxed set for 303 Brit as well as a backup set of 310 dies for 32-40 and another for 32 S&W Long. Organized people don't make the exciting discoveries I do, but at least they can find what they actually have when they need it!

    Froggie
    "It aint easy being green!"

  17. #157
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,264
    Quote Originally Posted by Green Frog View Post
    Well Magnet Man, somewhere between the event horizon and the actual black hole in my basement there should be some boxed sets classified as trading material. I had the previously mentioned TL Jr boxed set for 303 Brit as well as a backup set of 310 dies for 32-40 and another for 32 S&W Long. Organized people don't make the exciting discoveries I do, but at least they can find what they actually have when they need it!

    Froggie
    I need the 32 S&W Long!

  18. #158
    Boolit Master



    BrassMagnet's Avatar
    Join Date
    Apr 2012
    Posts
    2,264
    Still needing 32 S&W and 32 S&WL dies for 310 or TrueLine Jr. I even posted a WTB in S&S!

  19. #159
    Boolit Master
    Join Date
    Nov 2008
    Location
    Central VA
    Posts
    2,380
    All I've found so far is a spare 311 expander die and maybe a spare #9 PC. I've gotta get organized (maybe next year! )

    Froggie
    "It aint easy being green!"

  20. #160
    Boolit Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    10,342
    Quote Originally Posted by BrassMagnet View Post
    Still needing 32 S&W and 32 S&WL dies for 310 or TrueLine Jr. I even posted a WTB in S&S!
    Sorry, I'm using mine!
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

Page 8 of 10 FirstFirst 12345678910 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check