Group buy - 2 cavity, brass, Lyman 525 for use in wad by MP Molds

[karlB]

@ lenogun, i would take yours if i dont get on the list, i dont know what i am doing wrong. are there some special rules to get on the list?

[MiHec]

@ lenogun, i would take yours if i dont get on the list, i dont know what i am doing wrong. are there some special rules to get on the list?

I need your e-mail address and I will put you on the list.

[MiHec]

one for:
karlB
brunnerrene AT hotmail DOT com

@MiHec what do you think about bullet diameter .72 or .73 for using without wad?

For Full bore mold you can go here and buy it directly

http://mp-molds.com/index.php/e-shop...shot-gun-molds

Yes, it is new web page

[karlB]

Yea you are the best, i already ordered, looks like i was the 3 rd, but please keep me on the list for this group buy i like to have both options.
greetings from austria karlB

[ncbearman]

Miha has always been good about people having to drop out. He usually makes a few extra anyway. Nice of you to give heads up.

[Hogtamer]

Will you please let us know when to expect this run? Thank you.

[ohnomrbillk]

I'll take one

william (dot) Kinderknecht (at) gmail (dot) com

[6pt-sika]

For Full bore mold you can go here and buy it directly

http://mp-molds.com/index.php/e-shop...shot-gun-molds

Yes, it is new web page

Wats the OD for this one as it drops ?

[karlB]

Wats the OD for this one as it drops ?

I received mine today, just cast a view bullets but not with soft lead as i normaly do, for testing the mold i used the currently used mix for 9 mm para: 92 pb 6 antimony 2 tinn. the weight they drop from the mold is between 616 and 620 grain the front diameter is 0.725 and the bottom is 0.73

[6pt-sika]

I received mine today, just cast a view bullets but not with soft lead as i normaly do, for testing the mold i used the currently used mix for 9 mm para: 92 pb 6 antimony 2 tinn. the weight they drop from the mold is between 616 and 620 grain the front diameter is 0.725 and the bottom is 0.73

Thanks if I were to get one I'd cast 50/50 pure/WW and use them in a REM SP-10 wad for my 10 gauge guns . That's a skoosh bigger then I want going thru the chokes on those Damascus guns .

[MiHec]

List updated!

[MiHec]

Will you please let us know when to expect this run? Thank you.

As we speak I'm prepairing things.

[karlB]

Thanks if I were to get one I'd cast 50/50 pure/WW and use them in a REM SP-10 wad for my 10 gauge guns . That's a skoosh bigger then I want going thru the chokes on those Damascus guns .

@ 6pt-sika resize them, visit your gunsmith and ask for a piece of a barrel from shortening a shotgun. use the choke of the diameter you want and it works.
or buy a 10 gauge slug mold like this:
http://www.castbulletengineering.com...-single-cavity

[MostlyOnThePaper]

I'll take one.
kc5vtk at comcast dot net

Sent from my SM-G900P using Tapatalk

[6pt-sika]

@ 6pt-sika resize them, visit your gunsmith and ask for a piece of a barrel from shortening a shotgun. use the choke of the diameter you want and it works.
or buy a 10 gauge slug mold like this:
http://www.castbulletengineering.com...-single-cavity

I work out of a gunsmith shop �� I like slugs that are fine as they drop Bikerbeans already leant me his 12 gauge .730" 730 grain mold and I made a sizing die . Since then I've gone to cutting the petals off the wad and putting a .010" Mylar wrap on the slug and they shoot well . Thanks for the link but I don't care for that one .

[NYBushBro]

Please put me down for one mold.
mopedmedic AT hotmail DOT com

Thanks.

[Short Shot 22]

I will take one mold please. s12_d34 at yahoo dot com

[X-man]

Put me down for one!

X-man

sgpenney (at) gmail.com

[6pt-sika]

Remove me please sika6pt05 AT aol DOT COM . I counted today and have well over 400 already cast of these and access to a Lyman mold when ever I want it so I really don't need this .

[Tigman]

Is it too late to get in?
markthearc@comcast.net
Mark

Tigman