I have been making dies for myself for some time. I am slow, and new to making them for someone else, but if you want to give me a try you can pm me.
ammohead
I have been making dies for myself for some time. I am slow, and new to making them for someone else, but if you want to give me a try you can pm me.
ammohead
whats the chance on making one to fit a layman 450, I am still playing with cigarmans adaptor to use the 450 as a push through sizer and it works good on the larger diameters but has a tough time with smaller. what I was thinking was one identical to a layman die but without lube holes and with the sizer part only half as long as laymans. I'm thinking that would size the 223 and 25-06 and allow them to pass through easyier. no rush and even a little crude at this point would be fine, just still playing with cigarmans idea and trying to bullet proof it a little better.
pm me please I may have couple of different options. all doable. I made myself a adapter to use lyman dies as a push through sizer in my rockchucker press for .258 or any other diameter for that matter. Just need the correct diameter boolit pusher and any lyman/rcbs die.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |