This would a the .45 "Ruger Only" design more or less scaled down to .314 diameter. It would weight right at 105 grains.
This would a the .45 "Ruger Only" design more or less scaled down to .314 diameter. It would weight right at 105 grains.
Last edited by only1asterisk; 04-24-2016 at 07:11 PM.
Interesting. It would likely be a very good general use 32 Ruger bullet. But it seems a little bit lite.... In the 45 wasn't it about 325 grains - heavy for caliber. At 105 this wouldn't be considered particularly heavy for caliber. Are you considering a HP option?
ward
"To anger a conservative, lie to him. To anger a liberal, tell him the truth." —Theodore Roosevelt"
Depending on which ruger, that boolit might be too long in the nose to fit.
Would like to see a drawing, so I can check if it'll fit in mine.
The bullet is more or less scaled to retain the balance and accuracy tendencies of the .45 "Ruger Only". It comes out at 105 grains. There isn't much that can be done to change the weight that would not possibly alter the positive characteristics of the parent design. Ideally, if Mihec will take this one, I'd like to see a hollowpoint mold.
Thank you for the clarification. The Single seven cylinder is a bit shorter than some but a crimp groove to meplat of about 0.350" works in it. When talking a scaled down ruger only boolit, I was expecting a heavier and longer boolit. I have the MP 100 and 120 grain HP molds already. Brad
I have a really nice 125g .314 that I've been after Arsenal to make a run of but never garnered much interest here.
Ron Reed
Oklahoma City, OK
Check with 'Accurate Molds' as both designs are within his Tooling ranges.
chev. William
Accurate has several which fit these parameters which can be ordered immediately.
Attachment 181161 Attachment 181162Attachment 181163Attachment 181164Attachment 181165
The ENEMY is listening.
HE wants to know what YOU know.
Keep it to yourself.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |