.512 525gr LFN by Mihec in Brass

[ohnomrbillk]

MiHec .512 525gr LFN in Brass two cavity HP or Solid, PB or GC





Here is the link to the original discussion thread: http://castboolits.gunloads.com/show...ugh-50-Alaskan


For the two cavity solid, the price is $75 with plus $15 shipping.


For the two cavity cramer HP, the price is $90 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.


Note: Due to our present exchange rate, the price of the mold may not be fixed. It takes time to do these and the world economy changes during that time.

Pin options: 1) Large HP, 2) Small HP, 3) blank pins for solid.


Weights ready to load are: PB & GC solids 525 gr., hollow point 497 gr.,

Meplat to crimp groove 0.400".


Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at sometime determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.






Please give your disguised e-mail address and the number of molds and type you want.


Sign up list for the .512 525gr LFN by Mihec in Brass


2 cavity Solid

1. ohnomrbillk...william dot kinderknecht AT gmail DOT com...2 cavity solid PB
2. ohnomrbillk...william dot kinderknecht AT gmail DOT com...2 cavity solid GC
3. princeout...princeout AT sbcglobal DOT com...2 cavity solid PB
4. princeout...princeout AT sbcglobal DOT com...2 cavity solid GC
5. c.r. carroll.r.adams at gmail dot com...2 cavity solid PB
6. foxtrapper...(email address so disguised it's invisible)...2 cavity solid GC
7. Jason Freeman...jasonlfreeman at bellsouth dot net...2 cavity solid GC
8. bushog...boo-haaa at hotmail dot com...2 cavity solid PB
9. jdoc...jdoc2015 at yahoo dot com...2 cavity solid PB
10. jdoc...jdoc2015 at yahoo dot com...2 cavity solid GC
11. photomicftn...bclosius at myacc dot net...2 cavity solid PB
12. John In WYO...john113wyo AThotMailDOTcOM...2 cavity solid PB
13. Aaron...5090shiloh at gmail dot com...2 cavity solid PB
14. Aaron...5090shiloh at gmail dot com...2 cavity solid GC
15. JFE...jfe dot oz at optusnet dot com dot au...2 cavity solid GC mould


2 cavity Cramer

1. ohnomrbillk...william dot kinderknecht AT gmail DOT com...2 cavity Cramer PB all pins
2. ohnomrbillk...william dot kinderknecht AT gmail DOT com...2 cavity Cramer GC all pins
3. BK7saum...Bradleyk4860 at gmail dot com...2 cavity cramer HP PB all pins
4. bushog...boo-haaa at hotmail dot com...2 cavity Cramer PB all pins (1 of 3)
5. bushog...boo-haaa at hotmail dot com...2 cavity Cramer PB all pins (2 of 3)
6. bushog...boo-haaa at hotmail dot com...2 cavity Cramer PB all pins (3 of 3)
7. jdoc...jdoc2015 at yahoo dot com...2 cavity Cramer GC all pins
8. photomicftn...bclosius at myacc dot net...2 cavity Cramer PB with all pins
9. Zeus...gswaggart (at) gmail.com...2 cavity Cramer PB with Large HP and a blank set
10. MasterBlaster...gjnesq13 at gmail dot com...2 cavity Cramer GC with all pins
11. Arokcrwlr...kraigpendlet at gmail dot com...2 cavity Cramer PB with all pins
12. dmize...sixgunner67 at yahoo dot com...2 cavity Cramer GC,large HP and blank pins.
sixgunner67 at yahoo dot com
13. jason f...jasonfancher321 at gmail dot com...2 cavity cramer gc with all pins
14. wifarmboy...barkley37 at gmail dot com...2 cavity cramer hp plain base with all pins.
15. JFE...jfe dot oz at optusnet dot com dot au...2 cavity Cramer GC mould with large and small HP pins (2 pin sets)

[princeout]

2 cavity solid PB - one of these
2 cavity solid GC - one of these

princeout AT sbcglobal DOT com

[BK7saum]

2 cavity cramer HP PB

Bradleyk4860 at gmail dot com

Thanks.

[foxtrapper]

1-2 cavity gc solid thanks for getting this in the works!

[Jason Freeman]

I would like a 2 cavity solid with gc.

jasonlfreeman at bellsouth dot net

Thank You

[bushog]

Please add me for:

3 plain base Cramer type molds with all pin options

1 plain base solid mold.

boo-haaa at hotmail dot com

Thanks,

Bushog

[jdoc]

Please add 3 molds: 1 2 cavity with all pins and gas check, 1 2 cavity solid plain base and 1 2 cavity solid gas check

jdoc2015 at yahoo dot com

Thanks

[photomicftn]

1 x 2C Solid PB
1 x 2C Cramer HP PB with all pins

bclosius at myacc dot net

[Zeus]

Put me down for a Cramer with Large HP and a blank set. Thanks!

gswaggart (at) gmail.com

[MasterBlaster]

I'll take a Cramer 2 cavity GC with all pins.

gjnesq13 at gmail dot net

Thank you

[Arokcrwlr]

Put me down for a PB Cramer with all pins.

kraigpendlet at gmail dot com

[Snyd]

What is the projected time frame on this?

[John in WYO]

John In WYO .512 525 LFN/
.500 Linebaugh

john113wyo AThotMailDOTcOM

2 cavity solid, plain base. .513 diameter, One (1) please

[ohnomrbillk]

What is the projected time frame on this?

2 weeks

http://youtu.be/qLcjUmBncZ8

[Snyd]

2 funny. Seriously though. I've never got in on a group buy. Are we looking at like 30 days or 6 months?

2 weeks

http://youtu.be/qLcjUmBncZ8

[dmize]

2 cavity GC,large HP pins and blank pins.
sixgunner67 at yahoo dot com.
The last group buy I got in on was for the 32 sledgehammer. It took almost 2 years..SERIOUSLY.

[ohnomrbillk]

The last group buy I got in on was for the 32 sledgehammer. It took almost 2 years..SERIOUSLY.

I have been in a few that took even longer.

That said, Miha has been moving through these alot faster lately, and has eliminated a good portion of his backlog.

[Aaron]

Please sign me up for a 2 cavity solid PB , and a 2 cavity solid GC.

5090shiloh at gmail dit com

Thanks!

Aaron

[BK7saum]

I would like to change my solid mold from a PB to a GC. Thanks. Brad

[jason f]

2 cavity cramer gc with all pins

jasonfancher321 at gmail dot com