I have finally aquired the components needed to load for my Type 99. Am using the Lee CTL312-160-2R which are dropping out of the mold @ .315 using Lyman #2. Barrel slugged @ 3.145. According to my Lee Precision Data Max OAL is 3.13 and Min OAL is 3.03. Seating to the crimp groove gives me a OAL of 2.9535. Not loading a 'hot' load. 65-70% of the difference between start load and max load. Tried to judge the distance to riflings by loosely seating bullet and chambering. Did not seat more, i.e. did not touch riflings unseated. My question is: is this within perimeters, or should I seat the bullet further out. At present this is seating the bullet .308 into the case. THX in advance. Smltownr