I have a Tasco scope and it has 3 little allen screws that keep the turret in place and the screws won't tighten down.
Anybody got in advice on how to fix.
I tried calling the company to get a replacement and they are closed till Monday.
I have a Tasco scope and it has 3 little allen screws that keep the turret in place and the screws won't tighten down.
Anybody got in advice on how to fix.
I tried calling the company to get a replacement and they are closed till Monday.
You could try new screws if you can find them. but the holes are probably stripped out of thier threads not the screws. Depending on size they could possibly be tapped to the next size bigger but there is no going back from this change. You need to be carefull as firearms and optics often use non standard threads also. You might try your optomitrist for set screws for this.
.
I'm just curious how the three turret screws got loose in the first place - IMO, a very unusual circumstance.
.
Just put the scope on the rifle and never checked them. They came from the factory that way.
But I put a little dab of super glue inside the treads and gave it an hour and the screws tightened right down.
This is going to sound like scope snobbery, but the best fix is a new scope.
I have owned a lot of cheap scopes, and while they usually work- at least for a while; since I started buying good scopes I don't have problems.
Robert
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |