MiHec 9mm 147gr GC HP

[zubrato]

Group buy is closed! Thank you for your orders!

2 & 4 cavity brass molds of the 147gr GC HP
(PB option available)
Diameter .359" as cast
HP pins allow for 137gr deep HP, 147 gr HP & 155 gr FP
Given bullet weights are for WW + 2% tin alloy for the HP's and WW for the solids, w/ Hornady copper gas checks & lubed; ready to load.



147gr HP 137grHP 155 gr FP

Diagrams display as cast weight w/o GC or lube.
bullet weight will vary with alloy and GC material as copper checks are heavier than Al checks

For more information regarding bullet design & features click here

quick summary:
band proportions have been modified to allow some freedom in seating depth, despite gas check base
147gr version features a large HP for expansion at subsonic velocity
lube groove angle is more traditional for improved mold fill out & release
retains MP 125HP ogive & meplat for reliable feeding
155gr version can be used in 38sp/357mag and 9mm with proper load workup
I expect 137gr deep HP to be nothing short of explosive at 9mm velocity


Prices
2-cavity solid, the price is $75 with plus $15 shipping.

2-cavity cramer HP, the price is $90 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

4-cavity solid, the price is $90 with plus $15 shipping.

4-cavity cramer HP, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.

Pins available: big round, small round and blanks

(aluminum 6 cav molds are not available for this GB at this time)

This buy needs 20 orders to get off the ground

to order:
please specify # of cavities, plain base or gas check, specific or all pins, with your disguised email.

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.


Thank you for your interest

~z

[zubrato]

Orders:



Mold Orders for GC base:
4 cavity: 10
2 Cavity: 4

1. Jeff Houck - 2 cavity GC w/ all pins rayleneandjeff at cableone dot net
2. jmort - 4 cavity GC w/ all pins middleearthsalesandservice at gmail dot com
3. grunt4 - 4 cavity GC w/ all pins brianwhetsel at msn dot com
4. Lloyd Smale - 2 cavity GC w/ all pins lws43 at hotmail dot com
5. TUG - 4 cavity GC w/ all pins ronnieg nine 7 eight six 6 at yahoo dot com
6. hicard - 4 cavity gc w/ all pins hicard21atoutlookdotcom
7. paulinski - 4 cavity GC w/ all pins - pkrysztofiak at gmail dot com
8. JWNathan - 2 cavity GC w/ deep pins. gettin_greasy(at)yahoo(dot)com
9. Gumberc563 - 4 cavity GC w/ all pins Jnormoyle563 at Gmail (dot) com
10. iraiam - 4 cavity GC base w/ both sets of HP pins bortonira AT q DOT com
11. pack3480 - 4 cavity GC Cramer w/ all pins
12. Duffy - 4 cavity GC w/ all pins grnmchn at msn dot com
13. harley45 - 2 cavity GC w/ all pins eric at whitetigerleatherworks.com
14. CSH - 4 cavity GC w/ all pins shawnhoward31 at gmail dot com



Mold Orders for PB :
4 cavity: 29
2 Cavity: 2

1. grunt4 - 4 cavity PB w/ all pins brianwhetsel at msn dot com
2. dutch41 - 4 cavity PB w/ all pins sptien aaat ruraltel doot net
3. Cord - 4 cavity PB w/ all pins denbay58 at twc dot com
4. sathington - 4 cavity PB w/ all pins nateparkerbass at gmail dot com
5. TUG - 4 cavity PB w/ all pins ronnieg nine 7 eight six 6 at yahoo dot com
6. jeffkopf - 4 cavity PB w/ both sets of HP pins Jeffrey (dot) Kopf (at) capital one (dot) com
7. castblast - 4 cavity PB w/ both HP pins sthwld64 at gmail dot com
8. Karbon24 - 4 cavity PB w/ all pins audiobahn underscore one eight at hotmail dot com
9. mgread - 4 cavity PB w/ all pins markg(dot)read(at)gmail(dot)com
10. sureweld78 - 4 cavity PB w/ all pins. Alvatps at gmail dot com
11. cliffhilt - 4 cavity PB w/all pins cliffordhilterbrand(at)gmail(dot)com
12. 2wheelduke - 4 cav PB w/ all pins catchnfish at bellsouth dot net
13. Rockzilla - 4 cavity PB w/ all pins krantzent(at)googlemail(dot)com
14. Champ - 4 cavity PB w/ deep 137gr HP pins joevecoatyahoo dot com
15. woody290 - 4 cavity PB w/ all pins woody290 at cox dot net
16. pack3480 - 4 cavity PB w/ all pins dcasad(at)hotmail(dot)com
17. BNE - 4 cavity PB w/ all pins Barryellis1 at frontier dot com
18. daengmei- 4 cavity PB w/ all pins maengdei at Hotmail dot com
19. 41mag- 4 cavity PB w/ all pin sets & additional set of bothlarge and small HP pins 41mag AT peoplepc DOT com

21. fjruple- 4 cavity PB w/ all pins fjruple at comcast dot net
22. Hcmachine- 4 cavity PB w/ all pins rangr02 at hotmail dot com
23. Loudy13 - 4 cavity PB w/ all pins TFTCSL at yahoo dot com
24. Baja_Traveler - 4 Cavity PB - Deep and FP Pins, kschuma1 at san.rr.com
25. JimB. 4 cavity PB W/ all pins - jim atcall dialog dotcom
26. cast bullet doc - 4 cavity PB w/ all pins - doctorgaryo at gmail dot com
27. xacex - 4 cavity PB w/ all pin - rogue(underscore)diablo at yahoo dot com.
28. thetastycat - 4 cavity PB w/ small pins Gerry.senechal at the lovely google mail
29. FLYCUTTER - 4 cavity PB w/ large and small pins R underscoreKARK at ATT dotNET
30. Lagamor - 4 cavity PB w/ all pins Cj...Steineker...@...gmail....com
31. fivegunner - 4 cavity PB w/ small HP pins fivegunner-at-sbcglobal-dot-net
32. bilco - 4 cavity PB w/ both HP pins Wjdeller at Gmail dot com
33. dougader - 2 Cavity, Plain Base, all pins (flat, small hp, large hp) dougader at hotmail dot com

[Jeff Houck]

I'm in for a 4 cavity mold with both sets of hollow point pins. Are these pins reversible to make a solid bullet or do I need a third set of pins? If so then sign me up for three sets of pins.

[jmort]

4 cavity all pins gas check
middleearthsalesandservice at gmail dot com

Thanks for doing this. Great design

[Jeff Houck]

better cut this back to a two cavity mold rather than a 4 cavity.Also please make it a gas check bullet.
Thanks

[grunt4]

2-cavity cramer HP with all pins fb and 2-cavity cramer HP GC . brianwhetsel at msn dot com Thanks

[dutch41]

Please put me down for a 4 cavity W/all pin options, plain base.
sptien aaat ruraltel doot net.

Thanks for running this!

Scott

[Cord]

one 2 cavity GC HP with all pins. denbay58 at twc dot com
one 2 cavity PB HP with all pins. denbay58 at twc dot com

Thank you zubrato and Miha!

[sathington]

One 4 cavity PB with all pins

nateparkerbass at gmail dot com

[Lloyd Smale]

two cav hp with both hp pins. gas check please

[TUG]

1 each
4 cavity with all pins, PB
4 cavity with all pins, GC
ronnieg nine 7 eight six 6 at yahoo dot com
thanks,
Ronnie

[FLYCUTTER]

One mold, 4 cavity GC.,with large and small pins. R underscoreKARK at ATT dotNET

[Lagamor]

I want one. 4 cavity GC with flat point, big and small hollow point pins.
Cj...Steineker...@...gmail....com

[zubrato]

Update: Additional PB drawings added due to number of PB orders. Enjoy!

[Virginia John]

Let me know if you decide to do aluminum.

[Baja_Traveler]

4 Cavity GC - Deep Pins and FP Pins, kschuma1 at san.rr.com

[Lloyd Smale]

can we get a 4 cav with 2 plain based and 2 gas checked cavitys?

[hicard]

2 cavity gc with all pins or 4 cavity with 2 gc and 2 pb if you can Miha.
hicard21atoutlookdotcom

[MiHec]

can we get a 4 cav with 2 plain based and 2 gas checked cavitys?

If the bullet is same lenght, then yes. But it is logistic nightmare for me, too.

[Lloyd Smale]

then Ill let you make the call. Ill take either a 2 cav gas checked mold or a 4 cav with two gas check and two plain base which ever you want to sell me.