.25-35 load/manual

[FromTheWoods]

Where is the load data for .25-35? I've looked at the manuals offered in the Castpics Reloader's Reference and do not find information on loading gas-checked bullets. My manuals don't help either--I have two for cast bullets and more for jackets. My "Pet Loads" copy--someone who owned it before I did removed the pages for the .25-35. Feels as if I'm in the Twilight Zone.

I could (but it is not safe) figure out a load using H4895 with cast. --A tad stupid to load without proven data.

Reloder #7 is the powder I'd prefer to use for these gas-checked bullets (60 to 125 grains.)

My dies are idle in the press! Your help would be appreciated.

[Rattlesnake Charlie]

I'll scan the pages for .25-35 from my copy of Pet Loads. PM me with your e-address so I can send them via a pdf attachment.

[FromTheWoods]

Thank you Charlie. I'll get the PM to you.

[FromTheWoods]

If any of you know of more sources or cast loads for .25-35 using H4895 or RL 7 (Rx 7), please pass them along here.

[John Boy]

Here's some 25-35 load data, bullet weight specific - print the jpg ...

[FromTheWoods]

Thank you, John. I see you helped over here too.--http://castboolits.gunloads.com/showthread.php?296078-Loads-for-25-35