Does any know have a print of the standard P14 barrel dimensions they could post or all of the dimensions ??
Does any know have a print of the standard P14 barrel dimensions they could post or all of the dimensions ??
"Don't worry what they think. In the end it is not between them and you, it is between you and God."
Je suis Charlie!
"You won't know until you Actually try it"
"The impossible just takes longer."
"Don't let them beat you down with their inexperience."
"You'll never accomplish what you don't try. " - Moldmaker
You could start right here.
http://criterionbarrels.com/barrels/p14-enfield
“AMERICA WILL NEVER BE DESTROYED FROM THE OUTSIDE. IF WE FALTER AND LOSE OUR FREEDOMS, IT WILL BE BECAUSE WE DESTROYED OURSELVES.” President Abraham Lincoln
The only thing I have is the Shank end Dimensions for threading the barrel, and the Extractor Cut.
That is all I am really interested in , because I want to thread a barrel Blank and am not going to use the stock or any of the other hardware.
I plan to build a 30"+ length Bull Barrel Long RangeTarget Rifle on the P-14 action, probably in 7.62x54R.
I would like to use the Russian Chrome Lined Machine Gun Barrel if I can find a good one at a decent price, and not have to buy the whole Parts Kit.
Lags those dimensions would be greatly appreciated as they are the most critical ones. Thanks.
Gabby I am not seeing any dimensions there.
I am working on another oddball "special" project so I really need dimensions.
"Don't worry what they think. In the end it is not between them and you, it is between you and God."
Je suis Charlie!
"You won't know until you Actually try it"
"The impossible just takes longer."
"Don't let them beat you down with their inexperience."
"You'll never accomplish what you don't try. " - Moldmaker
P-14 Enfield barrel shank measurements
Barrel diameter just forward of shank shoulder: 1.325"
Shoulder to breech (thread shank): .720"
Threads: 10 sq. T.P.I.
Thread major diameter: 1.125"
Thread minor diameter: 1.085"
From face of breech to first thread .045" at minor diameter.
Extractor cut: Located at 3 o'clock, .275" in width.
DCM
if you PM me an Email address I can send it to you.
Again, this dang computer wont let me download pictures to the site.
“AMERICA WILL NEVER BE DESTROYED FROM THE OUTSIDE. IF WE FALTER AND LOSE OUR FREEDOMS, IT WILL BE BECAUSE WE DESTROYED OURSELVES.” President Abraham Lincoln
Thank you all gentlemen!
Gabby-yes I may end up contacting them if the info I got here doesn't suffice, good thinking.
Lags-PM sent
"Don't worry what they think. In the end it is not between them and you, it is between you and God."
Je suis Charlie!
"You won't know until you Actually try it"
"The impossible just takes longer."
"Don't let them beat you down with their inexperience."
"You'll never accomplish what you don't try. " - Moldmaker
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |