Please put me down for a replacement two cavity, but ask Miha to charge me for it again. I get two molds to play with! Miha has been far more than fair to me on previous transactions, and I want to pay for the second mold.
Tony
Please put me down for a replacement two cavity, but ask Miha to charge me for it again. I get two molds to play with! Miha has been far more than fair to me on previous transactions, and I want to pay for the second mold.
Tony
I must respectfully remove my name from this list.
My circumstances have recently changed and I think this may help Miha with his load.
I was #18 on the original list. The mould I got was great, but I erred when I ordered a 2 cavity. So...if it's possible I would like to order a 4 cavity brass PB HP @.360 with all the pins.
Group Buy fix details & new orders updated
Let me know if you would like your order info changed.
Thank you, and have a great weekend
1. USSR
2. 41mag
3. Jmort
4. Chrisstophere
5. Wasalmonslayer 2 cavity pb .360 diameter maxatyvmarinedotcom
6. Nueces
7. Beagle333
8. Stubach + purchase mounting hardware for new block
9. slide
10. low budget shooter 2 cavity HP plain base .358 jeff DOT richard DOT young AT gmail DOT com
11. lbullock1 + purchase new sprue plate & mounting hardware
12. JAC43
13. photomicftn - .360 HP PB 2C brass w/ all pins
photomicftn - bclosius at myacc dot net
14. cord
15. redhawk357mag- purchase same as first order
16. KA0811
17. mick27
18. Scotth
19. WARD O
20. foxtrotter
21. AnthonyB - purchase same as first order
22. HiPower
23. wonderwolf
24. Beau Cassidy - purchase same as first order
25. bangerjim - purchase same as first order
26. Luskejeger- replacement order #27 except .360
27.(new order) xtphreak- 6 cavity aluminum .360 PB millikenrh (at) gmail (dot) com
28.(New order) fjruple - 4 cavity brass 358 Cramer PB w/ all pins. fjruple at comcast dot net
29. (New order) Gun-adian - . 4 cavity 360 dia brass PB with large H/P pins and solid point pins - jumpgate at telus dot net
30. (new order) JimB.. 4 cavity brass, .360 PB HP with all pins. Jimat calldialogdot com (no spaces)
31. (new order) gtgeorge - 4 cavity brass 360 Cramer PB w/ all pins gspatton at gttransmissions dot com
32. (new order) sergraf - 4 Cavity Brass PB .360 w/ all pins sergio(underscore) rafanan(at)yahoo(dot)com
33. (new order) skonik - 2 cavity brass pb .358 w/ all pins skonik (at) gmail (dot) com
34. (new order) FLYCUTTER- 4 cavity brass 360 PB w/ all pins R(underscore)KARK(at)ATT(dot)NET
Last edited by zubrato; 05-25-2016 at 02:42 PM.
Recycle, Reuse, Reload.
I am late? Available international shipping?
2-cavity HP .358 with all pins...
I never received my original order after paying for it. Can I get on the list for the remake, please?
If its not to late I would like to be on the extra list for an 4 cavity brass, .360 plain base, all pins. RunderscoreKARKatATTdotNET
If it is still possible possible to get in on the list (since I missed the first time), I'd like to get a six-shot aluminum, plain base, .360".
millikenrh (at) gmail (dot) com. thanks!!
I found a mold for this bullet. Please cancel my order. Sorry for the inconvenience.
Thanks,
Bill
Idaho
Any chance you can just add the new hardware to mine as well. Easier to just have two complete sets. Still want to pay fair price for my corrected block though too.
Sent from my iPhone using Tapatalk
Please put me down for a replacement 4-cavity GC.
Change to 360"
I was #27 on the orginal list.
kri_stiansen AT yahoo DOT no
Thanks!!
Last edited by Luskejeger; 05-02-2016 at 02:35 AM.
I believe I paid for this mold and did not receive it. Is this post sufficient or should I PM either the honcho or Mihec.
#31 on original list
Thanks
Don Verna
Honcho Zubrato is very good about reading and responding to PMs.
Thank you LBS for the kind words.
Sent a PM last night, but for anyone in a similar situation, send MiHec a pm with your order info and PayPal email. MiHec has excellent customer service and takes care of us at cast boolits.
Have a great weekend, gents!
Recycle, Reuse, Reload.
I havn't been on CB for a while and have not had the chance to load any of these up yet. I may make a point to do that today, is there an issue with length from the bottom of the crimp groove to the nose of the bullet? I've read the thread but I'm confused, what is being fixed here?
My Gp-100 will does not like anything longer than the original 358429 length which is something I believe I brought up early on in this thread that length from base of crimp groove to top of nose is critical for some of us.
My firearms project blog
If I understood Miha's earlier post correctly, he accidentally made the length from crimp groove to nose .357" instead of the specified .375"
I think you were supposed to comment on the thread regarding if you desired a new set of blocks. Other people just jumped on for new molds.
Just my interpretation of it.
Three possible paths for you to take:
1- if you haven't gotten your original mold, contact Mihec, somehow you missed a notification or he missed a payment or something else fell through the cracks.
2- if you got the mold and are displeased with the error, get yourself added to the "ship corrected blocks to" list by posting "pls send me corrected blocks" in this thread.
3- if you got the mold and are happy with it, no need to do anything.
FWIW, I jumped on late only when it became clear that he was going to be cutting new blocks. My thinking wasn't to interfere with others that were on the original list, but that it wouldn't take much effort to cut an extra set at the same time he is cutting the replacements. At the time it didn't occur to me that he may not have enough other hardware to complete additional molds, but this is entirely possible. I'm sure that he'll take care of the replacements before anything else, but if you want replacements I think you gotta ask.
Just what I think gives,
Jim
The problem due to the transposition of numbers is that the forward driving band is too narrow and does not match the original drawing.
"To anger a conservative, lie to him. To anger a liberal, tell him the truth." —Theodore Roosevelt"
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |