Using a small electric pot that pours out of the top and wheel weights to attempt pouring some .312 185 gr. bullets for my Argentine Mauser 1891. Must be doing something wrong, these things have more wrinkles and defects than my highly abused 57 year old face. I had poured some 50 cal 320 gr. REAL bullets with the thing that were far from perfect but would shoot okay. Just melted those down today and tried again pouring them into the Mauser mold and still they are far from perfect. I get the feeling the metal is not hot enough and is hardening up before it fills the mold. Out of ever 10+ bullets poured it seems I get one that is acceptable. Any ideas as to where I am screwing up! Help me, I've fallen and I can't get up!