Payment send 1-29-16.
banger
Payment send 1-29-16.
banger
It's here...
If you live on the razor's edge and slip, you will die in two pieces
Not yet for me...
I got a red card that something from Slovenia is at the P.O. awaiting signature. I hope it's this one!!!
KE4GWE - - - - - - Colt 1860, it just feels right.
Mine arrived today and looks as good as my other MH molds. I appreciate all the extra pins, now I just need it to warm back up a little so I can start casting. Thanks again for a quality product and a great group buy!
Keep moving forward!
Got it today, what a beauty,, Can't wait to run a few thru the SBBH,,,,,,,,,,, Thank's!!
Fired up the pot today, heat cycled the mold and cast a few today. This has to be one of the nicest molds I have ever used. Just a light tap and they all fall from the cavities, and no smoking was needed.
If you live on the razor's edge and slip, you will die in two pieces
I got mine as well
thanks
Came in.
It is one sweet pouring mold, Freezing temps or not with a very soft alloy of about 10# pure lead and 1/4# 50/50 bar solder with 1# Lynotype,,, the large HP weighs 266gr. the small HP 277 grn. and the penta 275 grn, the cup 278gr. and once to temp and running good bullets, no cull's just perfect sharply filled bullets every dump with no tapping, they just fall out..... love it!!!
I still have a lot of this molds. PM me if you want one
Got mine today. Gorgeous! Thanks for the extra pins. Can't wait to get to cast with it.
Ask an American Indian what uncontrolled immigration did for his lands and his way of life. Then, think about your children's and grandchildren's future.
There was a great post on how to properly assemble the mold. Anyone have the link? Ahhh, found the link on FB, What I'm missing are the "C" clips, Anyone know what size they are? I'll try to find some locally.
Last edited by jgh4445; 02-22-2016 at 09:18 PM.
Ask an American Indian what uncontrolled immigration did for his lands and his way of life. Then, think about your children's and grandchildren's future.
The clips are called " E clips " and should be in the plastic bag with the pins. I also am overwhelmed at the stunning craftsmanship of Mihec's
WORK. The ease of casting is magnificent ! I will ask around for anyone else interested in a purchase.
Thank you Mihec.
The plastic bag with the E clips was not in the plastic bag with all the other parts. Just wasn't there. I'll take a pin with me on my travels today and see if I can find some.
Ask an American Indian what uncontrolled immigration did for his lands and his way of life. Then, think about your children's and grandchildren's future.
Miha has stated previously that the clips are these 3.2 x 0.6mm:
https://www.fastenal.com/products/de...Punchout=false
---------------------------------------------------------------------------
--BattleRife
Upon seeing this post, I PM'd Mihec re availability of a 4-cav HP with ALL the pins -- he PM'd me back this morning with his PayPal address and amount due in Euros... I went right to PayPal, he -- by now -- should have his funds, and I'll be anxiously checking my mail box with more fervor than normal! Thanks, Mihec, for posting availability!
georgerkahn
Thanks. They're on the way.
Ask an American Indian what uncontrolled immigration did for his lands and his way of life. Then, think about your children's and grandchildren's future.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |