Mihec H&G #503 Cramer HP

[MiHec]

Miha, what sort of sprue plate arrangement will there be on the 6-cav solids? And what price, please.

I'm thinking of two 6-cavs, one each in 432 and 434.

Price for 6cav aluminum is the same as 4cav brass solid.
Sprue plate is Lee style

[Nueces]

Thank you, Sir!

I'll have two 6-cavity aluminum solids, one each in 432 and 434.

mhkilgore...at...mac...decimal...com

[wonderwolf]

looking forward to it

[ryan]

Count me in if this is still running. Thanks!

dearborn416 (at) yahoo (dot) com
All Pins (Large round, small round and blank).432

[Zeus]

Count me in if this is still running. Thanks!

dearborn416 (at) yahoo (dot) com
All Pins (Large round, small round and blank).432

2 OR 4 Cavity??

[ryan]

4 cavity, please...thanks, Zeus!

[Spillway]

Zeus, I would like two 6-cavity aluminum solids in .432.
cbrown2239atsbcglobaldotnet

[Porterhouse]

I'm in for two 6 cavity solids. One each of .432 & .434.

kenjisato500 at gmail dot com

Thanks!

[JAC43]

Count me in for one brass 4 cavity solid, .434 dia.

Tippieacdo at AOL dot com

Thx

[Lonegun1894]

Could you please put me down for a 2 cavity .434" with all pins? Lonegun1894 at yahoo dot com. Thanks!

[Zeus]

Got you guys added. Everyone please check the list and make sure your order is correct. Thanks!

GS

[MostlyOnThePaper]

Please put me down for one 6 cavity .432 and one 6 cavity .434

kc5vtk at comcast dot net

[Wasalmonslayer]

I am all good again sold a few things to fund this.
432 diameter and all the pins.

Thanks
Slayer

[claudesapp]

1 four cavity solid .432 please
claudesapp at yahoo dot com

[kayak1]

I don't yet have a 44 idea's on what size I should order this in?

[Mal Paso]

I don't yet have a 44 idea's on what size I should order this in?

.432" will probably fit most guns and cleans up nicely sized .431+ and smaller.

.434" can be sized .003" or more air cooled but sizing water dropped .003" broke my sizer twice before I went .432" I size .431".

It's Backward But If you get the .432", find a gun with tight throats, and have Doug Guy ream the throats .4315. He has that reamer. All is fair achieving good gun geometry.

I am assuming revolver, singleshot as this is not great feeding in lever guns or semiautos. Takes Work.

Also one of the thing that make this a great boolit is the .1" front drive band. That may be inside the throat of some guns in which case that band must be small enough for the round to chamber. I consider that Ideal as there is no jump to the throat, it is already there, no chance of misalignment.

Enough? Too Much?

[Zeus]

I'll update when I'm back at the computer guys. Thanks!

[wonderwolf]

Mal Paso, i've not used the #503 but I do have a pair of 4 cav 429421's I got when I was in high school. My senior year I purchased a win 94 Trapper in .44 mag and shot many of those 429421's out of it, I don't recall any issues but I could see it being a problem with some lever guns out there. Loaded in a magnum case that style of bullet could give one fits. I tried a lot of different styles of bullets out of that lever gun including a DEWC with much success, Hope this bullet does just as well, the carbine sits in the back of the safe most of the time these days as I favor a bolt action .357 now but its still a hoot once in a while. These MP molds give me a great excuse to drag out old favorites thats for sure.

[kayak1]

With Mal Paso's help I would like to order a 6 cavity .432 Solid jason AT KATES dot ORG

Next time to look at ording S&W 529.

[tubesthatglow]

4 cavity with all pins please
hobgood AT ME dot com