Load DataMidSouth Shooters SupplyTitan ReloadingReloading Everything
Inline FabricationWidenersSnyders JerkyLee Precision
RotoMetals2 Repackbox
Results 1 to 1 of 1

Thread: WASR 10 AK and Ed Harris load.

  1. #1
    Boolit Master HARRYMPOPE's Avatar
    Join Date
    Jan 2011
    Location
    GRANT COUNTY Wa.
    Posts
    2,135

    WASR 10 AK and Ed Harris load.

    I have finished the first 350 rounds with a Romanian wasr 10.
    Initially it wasn't good at all and I traced it to a picatinny type gas block rail that was rattling. I replaced it with a standard forend and groups got better. The odd part is cast loads shoot 6" right compared to ball ammo.all shooting done with sights I can barely see at 50 yards. The bullet is a 155g .314 dia. 6 cavity nei Ed designed cut by Walt Mealnder. Load is 14.5 of old herclues 2400 (little dandy rotor 18)with a CCI 350 pistol primer.gas checks are aluminum and alloy is range scrap water quenched.
    Accuracy is about 4 moa and the point of impact is the same with hot or cold barrel.this load is more accurate that cheap wolfe ball.

    4 average groups shown and one if the better ones.

    Attachment 146778

    Attachment 146779
    Last edited by HARRYMPOPE; 08-17-2015 at 01:52 AM.
    Your mother was a hamster, and your father smelt of elderberries

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check