I'm fairly new to the casting art. We shoot Cowboy action with 45 Colt and 38 Special. I am dabbling with 30/40 and 7.62x54r as well. We will be using light to moderate loads in all of these calibers.
Pistol boolits are sized in a Lam II and rifle in a Lyman 45. We don't shoot in freezing temperatures so that is not a factor.
We started off using White Label 50/50. It's worked fine but is a bit messy. Recently I loaded the Lam II with a stick of the green RCBS lube. It is stiffer but more importantly less messy to work with.
I would like to switch to something comparable from White Label. BAC and 2500+ seem to be the obvious choices as I want to stay away from heaters.
Any thoughts or advice are welcome.