jibber jabber and such about the photos of unique tools go here.
|
   
   
|
|
jibber jabber and such about the photos of unique tools go here.
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Set up for neck thickness
I can use a LEE mandrill for the case I want to check
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
is that red bracket a chassis/heatsink from a DC motor drive ?
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Close, AC variable frequency for a convection oven blower motor.
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
Originally Posted by jeepyj
Very cool jeepy !!! need to do something like that too.
Lead bullets Matter
There are three kinds of men: The ones that learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence and find out for themselves. - Will Rodgers
jeepy i might have to do something like that for my rifle brass to work like a toothpick dispenser because i too use single stage presses
I think I'm about to make up a half dozen of jeepy's dispensers - a great easy idea deserves to be stole - er - borrowed!
different sizes for brass, bullets, shotgun hulls, wads, gas checks
It's very handy. After using it, I find it hard to believe that someone doesn't make one out of plastic commercially. Borrow away!!!
jeepyj
Sometimes it takes a second box of boolits to clear my head.
Feed back thread http://castboolits.gunloads.com/show...?261449-jeepyj
They do, you find them in pet stores in the food bowl aisle
GRANDPARENTS AGAINST RETINOBLASTOMA, BECAUSE NO CHILD SHOULD HAVE CANCER
Deleted. I should have read the rules before posting.
Last edited by HollowPoint; 06-19-2015 at 02:44 PM.
my handycrafted wet tumbler.
That is cool but needs explaining. Like how do you fill and seal it and what is that silver stuff it rolls on. Duct tape?
Lead bullets Matter
There are three kinds of men: The ones that learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence and find out for themselves. - Will Rodgers
I added a filler piece of PVC at the neck/reducer so the red drain plug fits, tighten the thumb screw and it's good to go. Don't use warm or hot water, sigh...... the plug will not hold pressure and makes a mess. That oops is the only leak or issue I've had.
The silver material is like double sided tape but does not compress, helps reduce slipping. Tried an inner tube but still had some slippage. The motor was scavenged, already had the pulley on the shaft. The pulley on the tumbler is 5" or 6" and the tumbler runs at about 75-100 RPM.
On the inside I glued 1" PVC cut in half to help with the tumbling. I'm not sure on total capacity, about 500 .556, 1500-2000 22lr cases. I have a deep well sink in the basement so I dump in the SS pins, citric acid, cases to the neck, fill with COLD water to the neck, add dish soap, insert the plug, give a shake to make sure everything is tight. Dry the body, put on the rollers, plug in and let it do it's thing.
LOL I'll post a picture of my PVC hydraulic (water) sausage stuffer later - that beast can make quite a mess when you forget which way to turn the water valve
OJC, I made something similar except I used a motor off a sewing machine, and used the foot pedal to run the thing. Unfortunately, someone needed the sewing machine and I had to give up the motor. It didn't work all that well, the rpm was way too high.
RED333 wins
DtheD is runner up
~~~~~~~~~~~~~~
“If someone has a gun and is trying to kill you, it would be reasonable to shoot back with your own gun.”
― The Dalai Lama, Seattle Times, May 2001
Congrats Red333 !!!! Way to get-R-done.
Awesomeness for DtheD !!!
Lead bullets Matter
There are three kinds of men: The ones that learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence and find out for themselves. - Will Rodgers
Thanks guys
So when do I get the check?
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
