Sign up list updated!
AVAILABLE MOLDS FOR ORDER:13
Sign up list updated!
AVAILABLE MOLDS FOR ORDER:13
Balta
Has this Boolit design been tested in a CZ or similar pistol?
I have same type 9mm mold from another mold maker.
They will not feed in a Grand Power Pistol.
It works good in my Beretta. I think the Grand Power and CZ pistols have a very tight chamber and it will not feed properly.
I might like to try the MiHec if it will work with the GP?
Do, or do not.
There is no try.
Yoda
Blanco,
this bullet design is tested in many pistols,incuding CZ models..i use it for CZ 75 SP01 and many shooters use it in CZ 75 Shadow that have very tight chamber ,sized at .357 and with COL of 28,8 mm.It work flawesly.
Dont have reports for Grand Power pistols ,but i am prety sure that will work in this pistols.
Maybe you have "same type " of mold but i dont think you have same design ,you can compare dimensions using bullet drawings.
Also you can do a litlle reserch of previous GB results ,hiere is link
http://castboolits.gunloads.com/show...5-or-125-grain
to see if sombody use this bullet for GP pistols.
Hope this helps..
1) 135gn BB 0.359.
jcp691atcoxdotnet
bangerjim
Sign up list updated.
AVAILABLE MOLDS FOR ORDER: 12
GB OPTIONS UPDATED!
This mold is now also AVAILABLE in 130 grain FB option.
Last edited by Balta; 06-29-2015 at 04:34 AM.
A friend wants one also. Up my order to (3) of the six cavity @ 135 BB .359.
So to be clear, I want 3x brass 6 cavity 135BB @ .359
Thanks,Dale
Clear like a sky,Dale...
3 molds for you...
Brass 135 BB .359"
lilbigmec AT gmail DOT com
Sign up list updated:
9 MOLDS AVAILABLE IN BRASS.
Last edited by Balta; 07-07-2015 at 12:09 PM.
Too slow for this nice mould. Is possible to use a lee type cam lever on this mould?
Last edited by el general; 07-10-2015 at 06:22 PM.
Balta, you don't understand me (beacuse my english is horrible). I'd like to say... The post run to slow!!!!!!!
Mould runs really fast, sure!!!
The lee style sprue plate..... I think does not need larger modification, beacuse mihec mades aluminium mould with 6 cavities, then maybe the same size for alumium and brass mould.
Last edited by el general; 07-12-2015 at 06:55 PM.
On the brass molds lever is not possible (at this time).
End of GB is very close...
Coomon guys...
Dont miss it...
Miha...Is there any way to orbit this cherry enough to make .452? I would try a six cavity if you could do that. ( I wonder what it would look like and what it would weigh.....)
I really want a smooth sided 45acp mold (200 grains) and a smooth sided 32-20 mold (100 grains).
Add to this a smooth sided .222 mold of 40 grains.
Dale
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |