Recently I rebought that mold to have the GC capability again. Even at Cdn. prices it didn't break the bank. Previously I'd drilled out the first one I bought with a 5/16" drill to remove/fill out the GC base. Over 2000 fps I load the GC'd boolit, under that, the PB. Both are now PC'd and both work fine in the .32-20, 7.62x39, .308, .303 Brit, .30-06, .300 win Mag, etc. over 4227, 4198 and RL7, sized as required from .309 to .314 or even unsized. YMMV.