Total loss house fire, prayers and donations appreciated.

[Bazoo]

Well if you are still interested I can probably fit 100 range pickup (yes just before opening day so safe to say once fired) 30-30 brass and possibly 2# of WW ingots and 1 of Lino in a SFRB and send it off Monday if it will help.

I could definitely use it. I am very appreciative of it. Not sure how much brass others are sending me, but that will round me out so i have more than enough for my needs.

[Bazoo]

Well, I talked to badwaterbill on the phone earlier, he seems like a real nice old coot!

[Bazoo]

bdicki, i received the package today. Thank you.

[Bad Water Bill]

old coot!

I'll hav U no I ain't a da ovr 180 yers yung,U wipper snapr.

[Bazoo]

[shoot-n-lead]

I have an extra RCBS powder trickler that I can send your way, if you need it. Might be useful in getting the exact powder loads for the 94.

[Bazoo]

I have an extra RCBS powder trickler that I can send your way, if you need it. Might be useful in getting the exact powder loads for the 94.

That would be great. I appreciate it a lot. I havent picked one up yet. I got a casting pot the other day, and a manual

[xbeeman412]

Let Me know what U are still in need of .. like scales, powder throw, press ect.

[knfmn]

Ok, I *finally* got the brass boxed up today! It's not much, and by not much, I mean 23 pieces of range pick up. I'm pretty sure it's once fired. I'll drop it in the mail on my way in to work this morning.

[Bazoo]

Ok, I *finally* got the brass boxed up today! It's not much, and by not much, I mean 23 pieces of range pick up. I'm pretty sure it's once fired. I'll drop it in the mail on my way in to work this morning.

I appreciate it. Its a start, with this and what others have sent me, it will be enough for a good while. No big rush I understand how things go sometimes.

[Bazoo]

Let Me know what U are still in need of .. like scales, powder throw, press ect.

I do need a scale. For immediate loading with the lee loader, i need a scale, calipers,and soon, a case trimmer and deburr/chamfer tool. A powder measure would be good to have. I dont have a press, and will need one so i can start loading for the pistols we saved. 45, 38/357, and 380acp are the calibers for those. Course i'll need dies. I plan to cast for all of them, and will use the lee bullet sizing dies.

I had a just a basic loading setup before, single stage press, lee powder measure, used dies. Nothing fancy, except i had an ohaus 10-10 scale, but i am content with anything provided it works.

[xbeeman412]

We leave in the morning for the other farm an wont be back tell mid week will put a package with all I can for U then. I think I can fill everything except the 380 dies.

Will fill the extra empty space with 45 and 357 brass befor shipping.

[Bazoo]

We leave in the morning for the other farm an wont be back tell mid week will put a package with all I can for U then. I think I can fill everything except the 380 dies.

Will fill the extra empty space with 45 and 357 brass befor shipping.

That would be a real blessing. I dont know what to think. Thank you greatly.

[xbeeman412]

Glad to help if I can

[Bazoo]

I appreciate everyones help very much. It has brought tears to my eyes a couple times. I finally am back to doing what i love. I chased down powder, primer, and few jacketed bullets already for the 30wcf.

[Bazoo]

Well i made some rounds with the lee loader, just 10. I had misfires. Looked like i didnt seat the primer enough as it was a light strike and another hit or 2 on the primer set the round off. Having never used the lee loader, i wasnt sure how hard to hit it. Will give it another go though soon.

[BrassMagnet]

Well i made some rounds with the lee loader, just 10. I had misfires. Looked like i didnt seat the primer enough as it was a light strike and another hit or 2 on the primer set the round off. Having never used the lee loader, i wasnt sure how hard to hit it. Will give it another go though soon.

Primers should always be seated flush or slightly below flush.

[Bazoo]

Primers should always be seated flush or slightly below flush.

I know. They all were flush, or below, the below flush ones is the ones that im thinking went off first try. I was scared of whacking them too hard with the tool, as it was my first time using the lee loader. I liked it though, once i get the hang of it, it'll be a neat thing to keep in a pack for hunting or whatever.

[xbeeman412]

Care package all wrapted up and will be dropped off at the Postoffice tomorrow. Be safe with all Your reloading.

[Bazoo]

Care package all wrapted up and will be dropped off at the Postoffice tomorrow. Be safe with all Your reloading.

I appreciate it very much, and I will be careful, as always.