MiHec (Mp-molds) 9mm-125 gn Hollow point mold

[MiHec]

I have 20 molds ready to ship.
Molds are .359 as cast, 125 grains (solids are 130grains). Molds are brass, 4 cav.

See link for previous buy

http://castboolits.gunloads.com/show...r-cavity-solid

If you want the mold, send me PM (personal message) with your e-mail included. I will send you PayPal request, then.

Blank, penta and round pins are included.
Price shipped is 130€ (at current exchange rate - 145Us$)

[Jlamont2020]

PM sent. MiHec you're going to bankrupt me by offering all these molds.

[greekman]

how easy would theses size down for 9mm?

[MiHec]

how easy would theses size down for 9mm?

No problem sizing down to .356.
But...... I have Tanfoglio limited custom and barrel is .355. I size to .357.
Lately we measured a lot of 9mm barrels. Mostly they are .356 or bigger.

[bangerjim]

Do you have a dimensional outline drawing of this? I could not see one in the link above.

thanks!

bangerjim

[greekman]

pm sent

[BattleRife]

Do you have a dimensional outline drawing of this? I could not see one in the link above.

You know, this bullet design, which came from 45 2.1, is probably the most popular Miha has ever done. It has been run seven times with hundreds of copies sold. For all that, I don't see that a dimensioned drawing has ever been published.

[PbHurler]

IMO, this is one great mould. My XDM loves it as well as a friends' S&W M&P.

Thank you Miha!

[MiHec]

16 molds still available

[RobsTV]

Using it here with XDm 9mm, S&W K-Frame 38spl and J-Frame 357magnum. Perfect in all. My favorite mold out of 17.

[bangerjim]

You know, this bullet design, which came from 45 2.1, is probably the most popular Miha has ever done. It has been run seven times with hundreds of copies sold. For all that, I don't see that a dimensioned drawing has ever been published.

MIHEC.....So what does it look like and what is the profile? I am very picky about the profiles I use in my 9's. Some work...........most do NOT.

[WMB30]

MiHec, PM sent

Bill

[Jlamont2020]

Bangerjim, this is an extremely popular bullet, and has been proven time and time again to work flawlessly. You can find endless amounts of testimonials, tests, and info on this forum. A quick search turned up this image, from a previous run of this mold.


I'm sure someone can confirm, but this appears to be the profile of this extremely successful mold.

[Lonegun1894]

That looks like it should be a great one. I gotta try to fight the temptation...

[MiHec]

Bangerjim, this is an extremely popular bullet, and has been proven time and time again to work flawlessly. You can find endless amounts of testimonials, tests, and info on this forum. A quick search turned up this image, from a previous run of this mold.


I'm sure someone can confirm, but this appears to be the profile of this extremely successful mold.

This is the profile

[EKE]

PM sent.
Eric

[grn]

PM Sent

[xacex]

If you don't already have this boolit GET IT! One of my all time favorite designs besides the 452-200 ACP boolit. I just cast up about 400 the night before last. I have a 50 cal ammo can full of 9mm using this boolit with PC sized to 357. All 9mm's I try it in love it, and I even use it in the 357 sig.

[bangerjim]

PM sent.

[Elkins45]

If you don't already have this boolit GET IT! One of my all time favorite designs besides the 452-200 ACP boolit. I just cast up about 400 the night before last. I have a 50 cal ammo can full of 9mm using this boolit with PC sized to 357. All 9mm's I try it in love it, and I even use it in the 357 sig.

I primarily shoot it in 357 Sig, but I also load it in 38 special and 357 Magnum. It is a very versatile little bullet.