RotoMetals2Snyders JerkyMidSouth Shooters SupplyLee Precision
WidenersRepackboxReloading EverythingTitan Reloading
Load Data Inline Fabrication
Page 1 of 4 1234 LastLast
Results 1 to 20 of 79

Thread: Re-run of Mihec 314640 115 grain HP with GC or PB

  1. #1
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    MD
    Posts
    208

    Re-run of Mihec 314640 115 grain HP with GC or PB

    TThis is a re-run for an exceptional bullet. I have been testing a lot of .32 bullets lately, and this one is a top performer. Don't miss out this time as I did last time! It is a shooter and in my mind the perfect balance of weight, speed obtainable, and design for top performance in the .327 Federal, .32 H&R, and .32-20. Mihec has given the go ahead to do the re- run and shouldn't take long to get out. State 2 or 4 cavity, HP or solid. Same pin options as last buy. Pin options: 1) large HP, 2) penta HP, 3) blank pin for flat nose


    For the two cavity mold, the price is $85 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

    For the four cavity mold, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.

    Price approved by MiHec.








    This bullet is pictured second from right.


    Four groups shot with this bullet. Only one load tested so far. Top right group has 3 in one hole. It is a shooter!

    WE NEED A MINIMUM OF 20 MOLDS, PREFERABLY 4 CAVITY TO HAVE THIS RE-RUN DONE.

    Please add your Email address to your order. Thank you!

    OFFICIAL LIST

    1) cast-n-blast 1 2C HP GC All pins, 1 2C PB all pins
    hoover0588 at aol dot com

    2) bushog 1 4C GC All pins. 1 4C PB All pins
    boo-haaa at hot mail dot com

    3) dragon813gt 1 4C GC All pins. 1 4C PB All pins.
    dragon813gt at yahoo dot com.


    4)princeout 1 4C PB All pins.
    princeout at sbcglobal dot net

    5)2 Dogs 1 4C PB All pins.
    fcgarza 0640 AT hotmail DOT com

    6)snappy 1 4 cav PB with large HP and blank pin
    snappydad AT hot mail dot com>>>>>>> 9 molds and counting

    7) MrWolf 1 4C PB All pins.
    ronyulick at verizon dot net

    8) coldmaker0 1 4C PB all pins
    bennie dot barnett at myrhinomail dot com

    9)autodidact 1 4 cav, GC, all pins,
    jbpaul at suddenlink dot net

    10)MasterBlaster 1 4C GC all pins
    gjnesq13 at gmail dot com >>>>>>>>>13 molds and counting

    11) mtnbkr 1 4C, PB, with large HP and blank pin
    allencb at gmail dot com

    12) Jacob Wilson 1 2C,PB, with large HP and blank pin.--
    bsfarm at wave computers dot net


    13)TUG 1 4C PB with all the pins. 1 4C GC all pins.
    ronnieg nine seven 8 six six at yahoo dot com


    14) 51cj3a 1 4C PB with all pins.
    jdzola at verizon dot net

    15) Markbo 1 4C PB with flat and large HP pins.
    mark10295 at att dot net >>>>>>>>>>19 molds and counting

    16) pack3480 1 4C GC with all pins and 1 4C PB with all pins.
    dcasad at Hotmail dot com

    17) jdoc 1 4C PB w/all pins
    jdoc2015 at yahoo dot com

    18) Cowboy_Dan 1 2C GC HP with penta and flat pins.
    mauckdan [at]gmail [dot]com

    19) ethang 1 4C PB, with large HP and blank pin
    ethang_64 at frontier dot com

    20) 2 Dogs for Sal 1 4C PB all pins
    nascarsal AT aol DOT com >>>>>>>>>>>25 molds and counting

    21) ryan 1 4C PB, all pins 1 4C GC, all pins
    dearborn416 at yahoo dot com

    22) 45workhorse 1 2C PB All pins
    Hasselb at embarqmail dot com >>>>>>>>28 molds and counting

    23) contender1 1 4C PB All pins.
    rugersa44 at yahoo dot com

    24) doctorggg 1 2C GC with all pins and 1 2C PB with all pins.
    gggmmg at verizon dot net >>>>>>>>>>>>>>>>>>>>>31 Mold

    25) Bronte454 1 4C GC HP with large HP pins.
    thadd 3220 at yahoo dot com .

    26) 358wcf 1 2C PB with all pins.
    cvcooks at astound dot net

    27) 19112tap 1 2C GC with all pins.
    kknmp at yahoo dot com >>>>>>>>>>>>>>34 molds and counting

    28) JWNathan 1 2C GC with large HP pins.
    gettin_greasy(at)yahoo(dot)com

    29) castalott 1 4C PB with round HP pins. 1 4C GC with large HP pins.
    hillyer56 AT yahoo dot com

    30)ohnomrbillk 1 4C Cramer GC All pins. 1 4C Solid GC
    william dot kinderknecht at gmail dot com >>>>39 molds and counting

    31) nueces One 4C GC with all pins, please.

    mhkilgore...at...mac...dot...com


    PLEASE CHECK THE LIST FOR YOUR NAME. IF IT IS NOT ON THE LIST, YOU WILL NOT GET A MOLD!!!
    Last edited by cast-n-blast; 06-04-2015 at 09:38 AM.

  2. #2
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    MD
    Posts
    208
    I'll start things off. 1 2C HP all pins with GC and one 2C HP with all pins PB.

    hoover0588 at aol dot com
    Last edited by cast-n-blast; 04-19-2015 at 10:54 AM.

  3. #3
    Boolit Buddy
    Join Date
    May 2012
    Location
    Northern NM
    Posts
    116
    I'm in for:

    Two 2 cavity GC molds with all pin options
    AND
    Two 2 cavity PB molds with all pin options

    boo-haaa at hot mail dot com

    Bushog
    Last edited by bushog; 04-19-2015 at 11:10 AM.

  4. #4
    Boolit Grand Master

    dragon813gt's Avatar
    Join Date
    Feb 2012
    Location
    Somewhere in SE PA
    Posts
    9,989
    Is this a gas check design? It so I would like a 4 cavity HP w/ all pins in both GC and PB. So that's two molds. dragon813gt at yahoo dot com.

    Anyway to get the drawing posted. I sort of remember the specs but I'm sure a lot have no idea what this mold is.

  5. #5
    Boolit Mold princeout's Avatar
    Join Date
    Sep 2010
    Location
    Texas/Oklahoma
    Posts
    27
    Put me down for one 4 cavity PB mold with all pin options.

    princeout at sbcglobal dot net

    Tim

  6. #6
    Boolit Master dougader's Avatar
    Join Date
    Jun 2008
    Location
    OryGun
    Posts
    625
    This is the mould, right? http://castboolits.gunloads.com/show...15gr-Cramer-HP

    If this will fit in the Single Seven, I'm in for a 2-cavity mould with pins for the large hp and flat nose.

  7. #7
    Boolit Master
    Join Date
    Mar 2005
    Location
    southern Illinois
    Posts
    2,352
    I need a little more information. Did the plain base shoot as good as the gas check ? How did it do in Marlins? Could you get enough velocity with the plain base for the HP to expand? In short, I'd like to know what you know...

    Thanks, Dale

  8. #8
    I'm A Honcho!
    Join Date
    Nov 2006
    Posts
    1,306
    4 cavity plain base all pins.

    fcgarza 0640 AT hotmail DOT com

  9. #9
    Boolit Buddy

    Join Date
    Jan 2013
    Location
    the other Louisiana
    Posts
    216
    Quote Originally Posted by dougader View Post
    This is the mould, right? http://castboolits.gunloads.com/show...15gr-Cramer-HP

    If this will fit in the Single Seven, I'm in for a 2-cavity mould with pins for the large hp and flat nose.
    Nope. Not crimping in the groove, anyway. Groove to meplat on this one is .350. You need to stay under .300 (I use .290 as a guide) to fit the short cylinder of the Single Seven. This boolit works in other 327's including the recently re-released Ruger SP-101.
    "He's whittlin' on a piece of wood. I've got a feeling when he stops whittlin', somethin's gonna happen." - Cheyenne, Once Upon a Time in the West (1968)

    "When you have to shoot, shoot. Don't talk." - Tuco, The Good, the Bad and the Ugly (1966)

  10. #10
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    MD
    Posts
    208
    dragon, that is the mold in question.

    dougader, this bullet needs to be deep seated a tad to fit in the single seven. One of the beauties of cast bullets is that it is no big deal. I shoot several cast bullets without using crimp groove either deep seated, or seated out. It works!

    castalott, I have only shot the the GC version, deep seated in .327 brass. I was impressed with this bullet so much, I am heading this re-run to obtain both GC and PB style slugs. I have yet to try in a Marlin.I Powder Coat all my bullets, and PB shoot exceptionally, the best I ever shot in my Marlin .357, .41, .44, .30-30, .35 Rem., .375 Win., .444's, and .45-70's. As to expansion, it entirely depends on your alloy.

  11. #11
    Boolit Mold snappy's Avatar
    Join Date
    May 2012
    Location
    Arizona
    Posts
    18
    Glad to see this run again. Please sign me up for a:

    4 cav PB with large HP and blank pin

    snap pydad AT hot m ai l dotco m

  12. #12
    Boolit Master Cowboy_Dan's Avatar
    Join Date
    Jun 2014
    Location
    Northern Indiana
    Posts
    701
    Has anyone tried this in a Tokarev? Is it too long for the tiny neck? Does it fit mags and feed? I ask specifically about the Yugo m57, but info frkm an TT-patern pistol is appreciated.
    "It is wrong always, everywhere, and for everyone to believe anything on insufficient evidence."
    -W. K. Clifford "The Ethics of Belief"

    "They hate you if you're clever, and they despise a fool."
    -John Lennon "A Working Class Hero"

  13. #13
    Boolit Buddy
    Join Date
    May 2012
    Location
    Northern NM
    Posts
    116
    Will you please change my wish to:

    one 4 Cavity GC with all pin options
    and
    One 4 Cavity PB with all pin options

    Thank You.

    Bushog

  14. #14
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    MD
    Posts
    208
    Done, bushog!

  15. #15
    Moderator Emeritus


    MrWolf's Avatar
    Join Date
    Apr 2013
    Location
    NE West Virginia
    Posts
    4,899
    I am in for one four cavity PB with all pins.

    ronyulick at verizon dot net

    Ron
    Last edited by MrWolf; 04-20-2015 at 06:24 AM.

  16. #16
    Boolit Buddy
    Join Date
    Feb 2006
    Location
    MD
    Posts
    208
    Need Email address MrWolf. Thanks!

  17. #17
    Moderator Emeritus


    MrWolf's Avatar
    Join Date
    Apr 2013
    Location
    NE West Virginia
    Posts
    4,899
    I added it. Thanks.

  18. #18
    Boolit Mold
    Join Date
    Sep 2012
    Posts
    5
    1 four cavity PB all pins
    bennie.barnett@myrhinomail.com

  19. #19
    Boolit Buddy

    Join Date
    Jan 2013
    Location
    the other Louisiana
    Posts
    216
    I am in for:

    One 4 cav, GC, all pins, jbpaul at suddenlink dot net

    Thanks,
    JB
    "He's whittlin' on a piece of wood. I've got a feeling when he stops whittlin', somethin's gonna happen." - Cheyenne, Once Upon a Time in the West (1968)

    "When you have to shoot, shoot. Don't talk." - Tuco, The Good, the Bad and the Ugly (1966)

  20. #20
    Boolit Mold
    Join Date
    Nov 2009
    Posts
    10
    I'll take one four cavity gascheck with all pins. Thank you.

    gjnesq13 at gmail dot com

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check