Load DataTitan ReloadingReloading EverythingLee Precision
RepackboxInline FabricationMidSouth Shooters SupplyWideners
Snyders Jerky RotoMetals2
Page 3 of 3 FirstFirst 123
Results 41 to 45 of 45

Thread: I shouldnt be tempted but: 10ga semi...and slugs?

  1. #41
    Slug Master in Remembrance
    Join Date
    Jul 2006
    Posts
    899
    For those who buy slugs you can put 69 cal Minie bullets in a 10ga VP100

    wad that BPI has. Dixie Gunworks has 69 cal Minies. they are 730gr and with

    105gr of 4759 will really get your attention in decent barrel 10 ga.

    If light barrel use 95 gr. In bull barrel NEF 10 ga we use huge loads of RE17

    about 160gr. Ed.

  2. #42
    Boolit Master
    Join Date
    Apr 2005
    Posts
    4,900
    Quote Originally Posted by longbow View Post
    Zinc would be bore safe though a full bore zinc slug would certainly not be choke safe unless it had fairly narrow ribs Brenkeke like.
    It depends what you mean by choke safe. The chances of actually bursting the barrel at the choke are low, and the chances of doing damage to yourself or even an innocent bystander even lower. It won't produce a classic ring-bulge, because the obstructing slug will have moved on by the time the gases have built up as a pressure wave. But especially in an old barrel, it could expand and perhaps even crack the choke. I don't believe this is likely with even a close-fitting plastic shot-cup wad.

    Most modern shotgun barrels are pretty true to the standard diameter, and are likely to have it stamped on them in inches or millimetres, rather than the less intelligible 10, 10/1, 10/2, 11 system. But it was quite common for early breech-loader barrels to be tight, and this is the one which is liable to be dangerous - not just a little, but very - with an oversize zinc slug. In this case the collision of zinc and steel will occur in the forcing cone, just where the front of the chamber is a weakness and pressure is at is highest.

  3. #43
    In Remembrance bikerbeans's Avatar
    Join Date
    Feb 2013
    Posts
    1,989
    Quote Originally Posted by hubel458 View Post
    For those who buy slugs you can put 69 cal Minie bullets in a 10ga VP100

    wad that BPI has. Dixie Gunworks has 69 cal Minies. they are 730gr and with

    105gr of 4759 will really get your attention in decent barrel 10 ga.

    If light barrel use 95 gr. In bull barrel NEF 10 ga we use huge loads of RE17

    about 160gr. Ed.
    Ed,

    95g of 4759 and a 740g HB fullbore slug got my attention in a 10ga heavy barrel H&R single shot.

    BB

  4. #44
    In Remembrance

    Join Date
    Mar 2011
    Location
    Texas
    Posts
    1,329
    OK, I finally went back to the sale thread, and...






    Well, its been sold. One less temptation.

    Although I am sure you guys will find one to tempt me with anew, someday!
    ____________
    "...the civil libertarians and rationalists who are ever on the alert to oppose tyranny "failed to take into account man's almost infinite appetite for distractions." In 1984, Orwell added, people are controlled by inflicting pain. In Brave New World, they are controlled by inflicting pleasure. In short, Orwell feared that what we fear will ruin us. Huxley feared that what we desire will ruin us. This book is about the possibility that Huxley, not Orwell, was right.” -N.Postman

  5. #45
    Boolit Master facetious's Avatar
    Join Date
    May 2012
    Posts
    559
    https://www.youtube.com/watch?v=bVy3GEotwBA

    you could get one of these to shoot slugs.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check