NOE Prittchet and Gardener .577" bullet moulds.

[dromia]

I have hankering for a mould of the CS Gardener bullet. I also need a new mould of the original Enfield Pritchett along with a shortened version for slow twist rifles like the P53 at the shorter distances.

To this end I have started a couple of discussion threads over on the NOE forum to see if we can get Al to run these moulds.

We only need ten to get this going.

Surely I can't be the only person looking for moulds for these bullets. So if you are interested, get over to the NOE forum and say so as.

Discussion threads are here:

Pritchett http://noebulletmolds.com/smf/index....pic,679.0.html

Gardener http://noebulletmolds.com/smf/index....pic,678.0.html

[Good Cheer]

Fixin' to scarf up a P53 but don't know yet which twist the manufacturer (Armisport) put in it. Well, or knowing them the bore diameter for that matter.
Reckon to find out soon.

[Baron von Trollwhack]

Dromia, suggest you also post over at the N-SSA site. There are at least 10, 000 musket shooters there, and many are history buffs, and boolit casters. A few Vendors of CW items also.

BvT

[dromia]

Thanks for that. It has already been posted there, seemingly from the replies and lack of response they prefer buying swaged bullets.

http://www.n-ssa.org/vbforum/showthr...tchett-bullets

[dromia]

Eight signed up for the Prittchet now, two more and its a goer.

There have to be more than eight of us shooting rifled muskets who want to make and shoot P53 cartridges surely.

[dromia]

Nine and counting on the Pritchett.

[dromia]

The drawings are now up for the Pritchett bullet on the NOE site, post No, 29.

http://noebulletmolds.com/smf/index....topicseen.html


Phwoarrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!

[dromia]

These buys are now live on the NOE forum.

http://noebulletmolds.com/smf/index....pic,917.0.html


http://noebulletmolds.com/smf/index....pic,918.0.html



Phwoarrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr!