Snyders JerkyInline FabricationRotoMetals2Titan Reloading
MidSouth Shooters SupplyReloading EverythingWidenersRepackbox
Lee Precision Load Data
Results 1 to 8 of 8

Thread: Primed cases.

  1. #1
    Boolit Buddy Uncle Jimbo's Avatar
    Join Date
    Jan 2012
    Posts
    466

    Primed cases.

    Can I ship primed cases by usps flat rate boxes?

  2. #2
    Banned



    Join Date
    Jan 2011
    Location
    Color Me Gone
    Posts
    8,401
    Yes, non-hazardous. Ship UPS ground. Not USPS ground.
    Last edited by jmort; 01-29-2015 at 10:03 PM.

  3. #3
    Boolit Master
    JWFilips's Avatar
    Join Date
    Feb 2012
    Location
    Northeastern part of Penn's Woods near Slocum Hollow.
    Posts
    1,920
    Not usps!..... I think jmortimer means UPS............ However I have accidentally done it ...twice
    " Associate with men of good quality, if you esteem your own reputation: for it is better to be alone than in bad company. " George Washington

  4. #4
    Boolit Buddy
    Join Date
    Jul 2011
    Location
    Ogilvie Mn
    Posts
    483
    No deprime or send them ups with the proper markings

  5. #5
    Banned



    Join Date
    Jan 2011
    Location
    Color Me Gone
    Posts
    8,401
    "I think jmortimer means UPS"

    Yes ground UPS

  6. #6
    Boolit Buddy Uncle Jimbo's Avatar
    Join Date
    Jan 2012
    Posts
    466
    Ok, thanks for the info. I think I will just do a ftf deal.

  7. #7
    Boolit Grand Master



    M-Tecs's Avatar
    Join Date
    Apr 2008
    Location
    Minnesota
    Posts
    9,563
    Not a problem to ship primed brass.

    http://forum.accurateshooter.com/ind...opic=3812580.0

    Hello everyone -

    Since this is my favorite forum, I feel compelled to share with all of you the REAL low-down on the laws and regs surrounding the shipment of primed brass.

    After a ton of confusion, misinformation (on other blogs) and general assumptions regarding the shipment of primed brass, here are the particulars/facts and the regs that back it up. I have confirmed all of this with UPS and FedEx's hazmat shipping folks and they all confirmed.

    FOR UPS AND FEDEX ONLY -

    Cases, primed (up to and including 50 caliber) are regulated for shipment by ground only through 49CFR § 172.102 SP(special provision) 50 that states:
    " Cases, cartridge, empty with primer which are made of metallic or plastic casings and meeting the classification criteria of Division 1.4 are not regulated for domestic transportation"
    49CFR § 172.102 (page 312) - http://www.gpo.gov/fdsys/pkg/CFR-201...sec172-102.pdf

    Primed cases meet the classification criteria of Division 1.4c UN0379 - however they are exempted and classified as NON-REGULATED (NOT ORM-D, NOT HAZ-MAT, NOT the new "Y" Limited Quantities classification that will replace ORM-D). Some manufacturers (as per the MSDS) classify their primed cases as UN0055, but the same DOT 1.4c classification applies, as does SP50.

    Packaging for primed cases is regulated by 49CFR §173.62 - Packaging instruction #136, which specifies that the primed cases have to be in a bag or box, then packed in a UN 4G standard box - which is defined by 49 CFR §178.601 (g)(2). So - you can't just ship them to your buddy in a shoebox, but most of us out here have received boxes of reloading components from various vendors, and most/all of these shipping boxes meet this criteria. For more mind-bending regulatory details, refer to 178.601.
    49CFR §173.62 - http://www.gpo.gov/fdsys/pkg/CFR-201...-sec173-62.pdf
    49 CFR §178.601 (g)(2) - http://www.gpo.gov/fdsys/pkg/CFR-201...sec178-601.pdf


    There is no hazmat fee, extra paperwork, no sign-by-adult or other hoops to jump through - BUT - both UPS and FedEX advised me to clearly mark (with a sharpee) "non-regulated as per SP50" on the outside of the box to ensure that no in-transit problems occur..........because I guess their employees can be as confused as I have been on this subject and you don't want your box torn or ripped into.

    As per both UPS and FedEx - You CANNOT take packages with primed cases to your local UPS/FedEx store or mom-and-pop drop off service. They must be taken to a UPS/FedEx corporate-run package hub that has walk-in/retail shipping services.

    FOR US POSTAL SERVICE -

    Prohibited. Period.
    See page 160 at: http://pe.usps.com/cpim/ftp/pubs/pub52/pub52.pdf
    ***USPS Publication 52, Appendix A, "Cases, cartridge, empty with primer"***
    They don't have to subscribe to all parts of 49CFR § 172.102's special provisions......because they are special I guess.


    I hope this clears it up.

    Best regards,
    S

  8. #8
    Boolit Buddy Uncle Jimbo's Avatar
    Join Date
    Jan 2012
    Posts
    466
    Quote Originally Posted by M-Tecs View Post
    Not a problem to ship primed brass.

    http://forum.accurateshooter.com/ind...opic=3812580.0

    Hello everyone -

    Since this is my favorite forum, I feel compelled to share with all of you the REAL low-down on the laws and regs surrounding the shipment of primed brass.

    After a ton of confusion, misinformation (on other blogs) and general assumptions regarding the shipment of primed brass, here are the particulars/facts and the regs that back it up. I have confirmed all of this with UPS and FedEx's hazmat shipping folks and they all confirmed.

    FOR UPS AND FEDEX ONLY -

    Cases, primed (up to and including 50 caliber) are regulated for shipment by ground only through 49CFR § 172.102 SP(special provision) 50 that states:
    " Cases, cartridge, empty with primer which are made of metallic or plastic casings and meeting the classification criteria of Division 1.4 are not regulated for domestic transportation"
    49CFR § 172.102 (page 312) - http://www.gpo.gov/fdsys/pkg/CFR-201...sec172-102.pdf

    Primed cases meet the classification criteria of Division 1.4c UN0379 - however they are exempted and classified as NON-REGULATED (NOT ORM-D, NOT HAZ-MAT, NOT the new "Y" Limited Quantities classification that will replace ORM-D). Some manufacturers (as per the MSDS) classify their primed cases as UN0055, but the same DOT 1.4c classification applies, as does SP50.

    Packaging for primed cases is regulated by 49CFR §173.62 - Packaging instruction #136, which specifies that the primed cases have to be in a bag or box, then packed in a UN 4G standard box - which is defined by 49 CFR §178.601 (g)(2). So - you can't just ship them to your buddy in a shoebox, but most of us out here have received boxes of reloading components from various vendors, and most/all of these shipping boxes meet this criteria. For more mind-bending regulatory details, refer to 178.601.
    49CFR §173.62 - http://www.gpo.gov/fdsys/pkg/CFR-201...-sec173-62.pdf
    49 CFR §178.601 (g)(2) - http://www.gpo.gov/fdsys/pkg/CFR-201...sec178-601.pdf


    There is no hazmat fee, extra paperwork, no sign-by-adult or other hoops to jump through - BUT - both UPS and FedEX advised me to clearly mark (with a sharpee) "non-regulated as per SP50" on the outside of the box to ensure that no in-transit problems occur..........because I guess their employees can be as confused as I have been on this subject and you don't want your box torn or ripped into.

    As per both UPS and FedEx - You CANNOT take packages with primed cases to your local UPS/FedEx store or mom-and-pop drop off service. They must be taken to a UPS/FedEx corporate-run package hub that has walk-in/retail shipping services.

    FOR US POSTAL SERVICE -

    Prohibited. Period.
    See page 160 at: http://pe.usps.com/cpim/ftp/pubs/pub52/pub52.pdf
    ***USPS Publication 52, Appendix A, "Cases, cartridge, empty with primer"***
    They don't have to subscribe to all parts of 49CFR § 172.102's special provisions......because they are special I guess.


    I hope this clears it up.

    Best regards,
    S
    Thanks for that info also.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check