MiHec/Oreo: 10mm WFN, 220gr, 190gr, Optional no-lube-groove for powder coat

[Oreo]

Yes, otherwise you're going to get a ton of spam.

[Paulinski]

Apologies made typo in my e-mail addy

pkrysztofiak at gmail dot com.

[300blk]

I'll take a 220.
Nwheary at gmail dot com

[JakeLeg]

Im in for a 220 grn with all pins and with lube grooves.thanks

[Oreo]

Jake I need your disguised email address to record your order bud.

[JakeLeg]

Its steffind AT grm Dot net

[sureweld78]

Put me down for a 1, 3 as well. Alva34 at hotmail dot com.

[Captain_Howdy]

I would like option #1 please...the 220 grain mold all the way... wumbarger1 (@) roadrunner (.) com

Thank you

[Aaron]

Add me please

220 pb all pins.

5090shiloh at Gmail dotCom

Thanks

[osteodoc08]

Please remove me from GB.

[TUG]

Please add me for option #2, 4-cavity brass mold cut for 190gr WFN with all the pins.
ronnieg nine seven eight six six at yahoo dot com
ronnie

[Willis74]

Does the group but have to reach 40 before it goes into production? Sorry if this is a stupid question but this is my first group buy. I am also debating my choice of the non lube groove mould. I will be powder coating but I have never tried a plain mould like this.

[Oreo]

The group buy runs till MiHec, the mold maker, decides to do the production run. It is entirely at his whim and could be tomorrow as easily as next year for all we know. The only certainty is that the product is worth both the price and the wait.

As to your second question, if there is ever a chance you'll use a conventional lube then get the version with the lube groove. You can always powder coat a lube groove boolit but not the other way around. I do have a theory that all else equal, there is a small performance advantage to a no-groove boolit.

[RED333]

. The only certainty is that the product is worth both the price and the wait.

As an owner of a more than a few of MiHec molds the wait is worth the time involved.

[FLYCUTTER]

Oreo, please remove me from this group buy. I think the 220 gr. will be to heavy and slow for my needs.

[RED333]

Oreo, please remove me from this group buy. I think the 220 gr. will be to heavy and slow for my needs.

Why not change to the 190 gr?

[FLYCUTTER]

I have the 190 gr. from the last group buy.

[RED333]

LOL as do I, but no lube groove.

[khmer6]

Does the group but have to reach 40 before it goes into production? Sorry if this is a stupid question but this is my first group buy. I am also debating my choice of the non lube groove mould. I will be powder coating but I have never tried a plain mould like this.

The wait is well worth it. Get something cheap on the side if you just want to shoot and flip it when you get the mihec.

[Willis74]

I won't shoot anything that is not coated so I will stay with the no grooves and was just curious about the time frame. My next couple months will be crazy with a move so was just curious.