Lee says the 6 cavity handles fit rcbs mold blocks. Ive been sanding the metal for 3 hrs and still not close. What gives?
Lee says the 6 cavity handles fit rcbs mold blocks. Ive been sanding the metal for 3 hrs and still not close. What gives?
You only have about another 9 hrs and 0.015" to go. The Lee 6 Bangers are too thick to fit into the slots on your RCBS mould. The tong portion that fits into your RCBS mould should measure about 0.295" and your Lee handles measure around 0.310".
RRR
"I Make the part.............................that makes the parts"
Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/
My Feedback!
http://castboolits.gunloads.com/show...Red-River-Rick
Lee lied or were misinformed
My lee handles fit just fine! I took an old extral lee mould that had been altered and out of shape and removed the handles and shimmed them to fit. If I remember right I had to drill the wholes out bigger too. I read this post and had to go check because I knew I had acouple RCBS moulds and couldn't remember what I did to get them to work!
Aim small, miss small!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |