What did you do in the reloading room today?

[onelight]

Loaded 450 45acp with 6.2 gr. Of BE-86 under 185 grain Hi-Tek RN. On the Lee ABLP

[Cast_outlaw]

Well Saturday I pressed primers into 12 444m cases charged them with rl7 and then went looking for my lee c430- 310rf but realized I had none lube sized and it was late afternoon. So I dumped the powder back out and put cases away for the night. Sunday I lubsized a small pile of boolits 431 with gas checks and finished my loading. Starting at 40gr going two 43 in a ladder. Test sometime still haven’t tested the 308s I made back a few months

[matrixcs]

fixed a dumb mistake...pulled 50 300bo which I loaded with .312 bullets...lol

[Texas by God]

I'm loading a batch of Lee 105 SWC bullets; some PC'd and some tumble lubed over 4 grs of AA#2 for some .38 Special fun this weekend.

Sent from my SM-A716U using Tapatalk

[jdfoxinc]

Finished point forming this batch of .224 fron or brass.

[JoeJames]

Loaded a batch of 44 Specials - 6.8 grains of Unique with home cast tumble lubed non quenched .430" 240 grain SWC's.

[Hossfly]

Got j word bullets in from Midway, 243 dies in from Hi.. have powder and primers, and cases. Guess have no excuse now to load some to try out.

[rockrat]

Sized/gas checked/lubed a few hundred 22-55 fp boolits to .225 and loaded 50 rounds of 223 to try in my bolt gun. Man, those litttle tiny gc's are a pain!!

[Soundguy]

finally counted, sorted, marked via stamp, and then stacked all of my various leads and alloys.

Now I know what I have on hand, and it's in easy to grab/use spaces on some custom junky shelves I made. I also melted down all of the odd pig and muffin ingots I have and now have them all in either pound or half pound ingots.. much easier to use. The 2# muffin ingots stack nice.. but kill pot temperature in a 10# pot.

[sigep1764]

I opened up my Star 225 sizing die the other day to 226. So this morning was spent putting a second powder coat on the already sized boolits to resize them to 226. Then powder coated and gas checked and sized another 200 boolits. Only a few thousand more to do...

[The Dar]

Loaded up 48 rounds of 44-40 with a Lee 200gn RF over some Longshot for the Son in Law.

[BigAlofPa.]

I loaded a pile of 223. 50 with 2400 and the rest with IMR4895. I want to compare these loads to the ones i shot when i put the new scope on. They were loaded with red dot and varget. After i was done loading. I vacuumed the man cave. I seam to get tumbling media on the carpet. No matter how careful i am.

[Cast_outlaw]

Not in the reloading room but ran 12 444marlin loads I made last weekend over my chronograph and out to 50m (54yards) here are the results.


Goal is a dangerous game load for grisly and black bare defence think I got it

[PapaJ]

Vacuumed the reloading room. Sorted through all my buckets, bags, and bins of brass. Found several pieces of some obscure brass I. The bins: 30 American Army, 32 Win Special, 440-40, 32-20, and much more. I keep finding all kinds of treasures in the bins of reloading components I inherited from a dear friend.

Sent from my Pixel 3 XL using Tapatalk

[drac0nic]

I powder coated the last of my Lee 105 SWCs, finally caught up on powder coating. I did a ton of Lee 125 LRNs, the .452 200gr LRNs and these 105 SWCs a long time ago and never got around to powder coating them after I ran out of HF Red. I went up to Eastwood which isn't far off and got some dark blue from them. It seems pretty good, guess we'll know when we shoot it. I do need to resize now, but I need to get a press set up and fixed for that first.

[robg]

still lock down here so i did a bit of casting 100x340gr 457 boolits and 100x190gr 358 boolits.tumble lubed.

[jdfoxinc]

Finally got my star lubrisizer to agree with my paraffin and bees wax based lube. And finished sizing/living the last batch of 115 gr .355.

[44Blam]

Loaded 100 10mm - gonna do this for the next few days until I load all the 10s. I've got about 300 to go.

[sigep1764]

Sized 500 223 cases, loaded 120 223 for the range tmro with powder coated boolits, and checked, powder coated, and sized 200 223 boolits. It was a 223 kinda night.

[Texas by God]

I noticed that I needed to replenish my supply of 30-30 cast loads. So I combined some C309170F @.309", LLA, 25grs of 3031 with CCI primers - a classic recipe that my rifle and I like- a lot.

Sent from my SM-A716U using Tapatalk