What did you do in the reloading room today?

[DAVIDMAGNUM]

I loaded 50 rounds of 357 magnum BLACK POWDER ammunition . Why ? Because I can !! Okay, it is fun to shoot in my rifle, I figured out how to eliminate blowback into the action, it is accurate, it is as easy to load as smokeless, I have five pounds of Elephant 2F........

[jdfoxinc]

Finally got down stairs, (herniated a disc in Oct.), on Mon. Threw my laundry in the washer and sat down to derin 22LR brass while it ran.

[hickfu]

Over the last 2 days I have cast up around 125lbs of 405gr 45-70 bullets. I wont powder coat until it gets warmer and way less humid. Next task will be 125lbs of 430gr 45-70 bullets.... I figure its winter so its time to cast quite a few hundred pounds of bullets, my BIL in Idaho wants 357 and 44 mag bullets to load so I will be doing them after the 45-70's

[44Blam]

Over the last 2 days I have cast up around 125lbs of 405gr 45-70 bullets. I wont powder coat until it gets warmer and way less humid. Next task will be 125lbs of 430gr 45-70 bullets.... I figure its winter so its time to cast quite a few hundred pounds of bullets, my BIL in Idaho wants 357 and 44 mag bullets to load so I will be doing them after the 45-70's

That is a WHOLE lot of 45-70. I feel like I did a lot of work shooting about 50 or so in a sitting...

[Cast_outlaw]

Building a new bench for presses, as I had some strength problems with the one in the background. hope I don’t have that problem with this one not finished yet but getting there, plywood brackets for the ends and smooth out the top

[Texas by God]

My nephew has a Single Ten that had missing fiber optic in the front sight for whoever knows what reason.... I decided to substitute 16gauge copper wire in there, and tried the CB shorts out the back door of the reloading room.
Let's not talk about that little guy above the "W"......

Sent from my SM-A716U using Tapatalk

[kmw1954]

Now that is a bench! Hope you never have to move it!!!!

[kevin c]

It looks...substantial...

I'm worried though: might flex too much and sag there in the middle over time...

[cwlongshot]

Started loading up Bulk 300 bo using 110 Nosler culls I picked up last summer. 19.3g 296 shoots really well!!

Just fillin ammo cans

CW

[Lloyd Smale]

i switched gears to bo's myself. Loaded up a bunch of test rounds for the ham'r and had 200 110 barnes tssx bullets i just found. they wouldnt work in the ham'r but are my go to bullet in the blackout so i sized and primed whatever 300 bo brass i had and tumbled it yesterday. Today ill load up those barnes bullets and cast in whats left over. Ive got a PILE of loaded bo's already but have been on a load every piece of brass in the shop kick this fall.

[toallmy]

I spent the last 2-3 days beating my head against the wall trying to load some 380acp loads without the right equipment . I finely decided to just wait until all the craziness ends .

[Vegas Vince]

Cleaned the bench off, & seated about 500 22 cal. boolits in 30 cal. sabots. Soon to load 308 win.

[robg]

prepped so 357 mag brass .going to have a loading session during the post Christmas lock down.

[Loudy13]

sized 3-400 300BO cases, prepping to load 208gr Mihec HP subs

[Gtrubicon]

Deprimed and sized 5lbs each of 38 and 357, they are wet tumbling now. I did these on my Lee app with my Dillon case feeder supplying the cases. Man am I impressed with that app press.

[Doubles Shooter]

Shoveled off my bench and I gave my home built PID a test run. Works great. Also did a small batch of,45's with one of the new colors I got from Smoke

[Jal5]

Deprimed a bunch of 9mm that will get washed tomorrow


Sent from my iPhone using Tapatalk

[44Blam]

Resized and trimmed 104 45-70 cases. I found 4 Hornady cases - have NO idea where those came from. But those hornady cases are about 1/16" short. So, I've seperated them out... I'll have to see where my boolit seats in those cases so I have the same volume/charge.

[sigep1764]

Reloaded 200 rounds of 30-30 with 6.5 grains of Red Dot and an Accurate 312-157R and 10 rounds with an NOE 150 grain hollow point. All lubed with Carnuba Blue. Then moved to 50 270Win with the RCBS 270-150 lubed with Lyman Orange Magic. Between me, friend, and his kids, we are almost at 1000 of these 30-30 through the Marlin 336 and 3000 through the 270. They are a hoot!

[trixter]

Peeked in as I walked by on my way out the door to go to work (13 days left) woooooo hoooo!