What did you do in the reloading room today?

[Rifletom]

Loaded up some 30-30 rounds with 165gr RNFP coated[Missouri bullets] with 8 and 9gr Unique.
That sure looks like a small amount of powder in that case. I need to find a powder that works close to that pressure and velocity, but, fills the case more. Suggestions?

[6bg6ga]

Polished 3)Attachment 246493 Dillon powder measures

Picture of one of them.

[6bg6ga]

I have a 550 with every aluminum piece polished. It makes it stand out over a standard 550. The count now is one 550 with all the aluminum finish parts polished, and two additional powder measures for the 650 that I polished.

[jdfoxinc]

Stuffed cores into annealed 9x19 cases to make .40 I words.

[cwlongshot]

Loaded up some 30-30 rounds with 165gr RNFP coated[Missouri bullets] with 8 and 9gr Unique.
That sure looks like a small amount of powder in that case. I need to find a powder that works close to that pressure and velocity, but, fills the case more. Suggestions?

TRAIL BOSS is what you wanting. Near full pressure but low velocities.

Load 75-100% Density but dont compress.

CW

[Keith 429421]

Got a Black & Decker cheap hot plate about 12 dollars at a "Ollies" Store that sells I guess liquidated items and put a piece of 3/8 x 3 inch x 12 inch flat steel bar stock on it to heat my Lee 6 cav 175 gr 40 S&W mould It worked great had the mould heated right up gently to 180 f with my Craftsman infrared thermometer and began to cast after a few runs excellent bullets. Learned it from Cast Bollits members here thanks !

[Tom W.]

Sized and lubed 50 125 gr. RF Lee boolits. Then I got back into the house. The air conditioner in the shed helped a little, but not much, with the heat index @105 outside, and the shed is uninsulated metal.

[jdfoxinc]

Stuffed more future j word 9x19 brass.

[44Blam]

Unloaded the 150 40 s&ws I loaded the other day.

[mac60]

Prepping 100 pcs. ppu 7.65x53 Mauser brass. Annealed 115 pcs 7mm08 brass.

[Tom W.]

Resized and tumbled the 9mm cases that I fired this morning, and later resized the 30/30 A.I. brass that I fired. It was too hot to try to tumble that today.....

[cwlongshot]

I Sized a pot of NOE 360-232 RDs I powder coated with a new Color Im Callin Catenne Pepper!!

HOTT STUFF!!!

CW

[Michael J. Spangler]

Broke out the 45 Colt conversion for my Dillon 550. Set it up and got read to load.

Nope never mind the conversion I picked up from a buddy is a 44 mag in a 45 colt box.
DOH!
ah well I’ll borrow the correct conversion from another buddy until I can sort this out.

[Winger Ed.]

Since I short loaded the powder charge in some 5.56s,
I figured out how to pull the bullets---------- all 300 of them---- without leaving too much of a ding using electricians pliers.

[Texas by God]

Loading cast for the first time in my 22-250. Curdog graciously sent some boolits for me to try.

[waco]

Loading the NOE H&G68 clone with 4.8gr of Redot. PC satin black.

[waco]

[robg]

Stripped and cleaned 4 1022 mags ,amazing how much crud gets in them .

[waco]

Stripped and cleaned 4 1022 mags ,amazing how much crud gets in them .

Had mine since 1987. Maybe I should clean mine...

[Tom W.]

Cleaned the 30/30 a.i. brass that I fireformed yesterday and cleaned two pistols. It wasn't quite as hot late this afternoon due to a thunderstorm just south of here.... still couldn't stay in the shed, even with the a/c for too long.