Been a good week for adding to the reloading/casting supplies!
I scored three-5 gallon buckets of WW, purchased 1500 .357" jacketed FPs, 100 200gr .357 JHPs, 100 .357 mag and 100 9mm brass all clearanced!
I also managed to find 250 rounds of .338 RCM brass online and ordered it immediately!
Loaded up some more 32 win special rounds. 32-170 using 20.5 gr of 4198. Had great results yesterday at range with first five in a pre64 94 and wanted to explore further. Made five more at that load and another five at 22 gr. Working my way up...
“I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people and I require the same from them." the duke
Cast up a batch of .375's to try in an 375 H&H.
Reloading bench converted into many rifle building bench ��
Lubed a big box full of boolits and loaded 300 of 'em into .40 S&W. That'll get me through the weekend.
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
Been working on a shooting bag for muzzle loading. Cast some 500 gr 58 caliber boolits for same.
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
Formed and primed about 500 rounds of .300 Blackout ... will load them tomorrow ...
I may have passed my "Best Before" date, but I haven't reached my "Expiry" date!
Day two ... loaded the .300 Blackouts with 150 grain soft points over 15.5 grains of Winchester 296 ... so tomorrow it's on to some .358 Winchesters and .40-90 3" Ballards!
I may have passed my "Best Before" date, but I haven't reached my "Expiry" date!
Nothing reloading wise, but I did put the Talon groups on my XD-45 Tactical and later today going to assemble the 300 Blackout AR-15.
Cast and powdercoated some 400gr and 500gr for 458 SOCOM.
Also swaged some bullets for a 357 Maximum carbine.
190gr plinkers with exposed soft lead tips using 310dia-170gr core, RCE 40cal jackets I drew down to .355 for swaging and BTSniper's dies.
180gr hunters using a 310dia-120gr core, annealed 9mm case drawn down to .355 and BT Sniper's dies.
Alcohol Inventory Reduction Specialist (Journeyman Level)
Inline Fabrication upgrade on my Lee Classic, auto eject and ergo handle.
This cost almost as much as my reload setup.
Well, I didn't read a label correctly and I poured a few hundred pieces of 38 special brass into a bag of 38-40 brass...
______________________________________________
Aaron
Talon "groups"???Originally Posted by 308Jeff
Cast, sized and lubed 300 45-270SAA and 200 45-255rnfp for my Ruger. Maybe tomorrow I will cast some softer, to start working on my whitetail load? hc18flyer
Lather rinse repeat.
I can see the bottom of the gas check container.
Oops!Talon "groups"???
My thoughts exactly.
Been there....done that.
Loaded up 20 .223 with 55 gr sierra blitzkings over 24 gr of tac .sized 60 308 cases .
Got the LNL AP and case feeder running pretty good.
Resized and wet tumbled 1,200 pieces of 45 ACP Speer nickel brass.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
